DVD USER'S MANUAL
TROUBLE SHOOTING
1. Types of Discs Your DVD Player Will Play
If your DVD player encountered a problem, please check the below situations before requesting
service.
Types of Discs
Diameter Playback
Time
Data Format
Remark
PROBLEM
CHECK
and
USB&Card
Reader
MPEG-4 12cm
8cm
74min
20min
USB1.1, MMC SD, MS,MS-
Pro,CF, SMC
MPEG-4
NO Power
Does not play
Check if the power cord has been properly connected to the power outlet.
Check if the main power has been switched on.
No disc, load a disc.
Disc has been loaded upside down. Place the disc with the label side up.
Disc's region code does not match to the player,
Disc's rating level is higher than the player's rating levelsetting.
DVD
12cm
1 layer: 12min
DVD Format Disc:
2 layers: 240min Compressed Digital Audio
8cm
1 layer:80min
Compressed Digital Video
2layers:180min Moving
picture
SVCD 12cm
45min
MPEG2
Compressed Digital Audio
Compressed Digital Video
Moving picture
VCD 12cm
74min
MPEG1
Compressed Digital Audio
8cm 20min
Compressed
Digital
Video
Moving picture
CD 12cm
74min
CD-DA:
8cm 20min
Digital
Audio
HD-CD 12cm
74min
HD-CD:
Digital Audio
MP3/JPEG 12cm
600min
Compressed
Digital
Audio/
Compressed Digital picture
* Note: DVD-R, CD-R, CD-RW discs can be played in this DVD player.
Include:
SVCD
CVD
Include:
VCD2.0
VCD1.1
VCD1.0
DVCD
No Picture
(When you
connect this
player to a TV)
Picture
noise / distorted
Picture not full
screen
Problem
message display
on screen
Malfunction
Disc is not correct type for the player.
Disc is damaged or dirty, clean the disc or try another disc.
Moisture may be condensed inside the player. Remove the disc and
leave the unit power on for one or two hours.
Check if the TV set has power on, use TV remote to select A / V signal
for DVD rather than broadcast.
Check if the system connection is proper and secure.
Check if the connection cables are damaged.
Clean the disc.
Please press OPEN button, then press PROGRAM and ZOOM button to
return factory default status.
The disc is dirty or damaged. Clean the disc or try another disc.
Reset the color system of the TV set.
Try by connect player direct to the TV set, without via a VCR for example.
Select the screen format from the player's SETUP MENU, see "SETUP
MENU" of this manual.
Select the screen format from DVD disc menu.
Following message will display when there is a problem with the loaded disc:
WRONG REGIONAL DISC
: Disc's region code does not match to
the player.
WRONG PASSWORD
: The player refuse to playa disc with rating level
higher than the player's rating level setting. or input
the wrong password in setup menu.
WRONG DISC
: The player is equipped with automatic disc quality
detection software. When the player detects a problem
disc or a damaged disc, the player may keep playing the
disc at lower quality or stop playing, depending on the
damage level of the disc.
Should the player develop a malfunction, unplug the player for 30
minutes. After 30 minutes, power on the player and the restore function
should reset the player.
2
19
Содержание DVD-51
Страница 1: ...DVD 51 ...