LENCO DIR-260, Руководство пользователя, Страница: 29 / 261

29
3. In System settings menu, if Language is selected, select one to set the interface
language.
4. In System settings menu, if Factory Reset is selected, set it to "YES" to proceed, set it to
"NO" to cancel factory reset.
5. In System settings menu, if Setup wizard is selected, you can confirm if start setup now.
6. In System settings menu, if Info is selected, you can check the "SW version", "Radio ID"
and "Friendly Name".
7. In System settings menu, if Backlight is selected, the screen will appear as attached
images.
If Timeout is selected, you can set the backlight of the screen of Timeout to On, 10 sec,
20 sec, 30 sec, 45 sec, 60 sec. 90 sec, 120 sec or 180 sec.
If On level is selected, you can set the backlight of the screen of Power On level to High,
Medium or Low.
If Dim level is selected, you can also set the backlight of the screen of Standby Level to
High, Medium or Low.
Error messages
Message Description Example
Failed to connect
Correct key entered, but router
rejects request MAC filtering enabled on
router
Format error
Cannot recognize file format –
independent of network
Received MP3, but found that
the stream wasn't MP3 when
trying to decode
Network error
Problem past router - incorrect data
being received from network
Data obtained from server is
unreadable.
Network not ready Problem with connection to router Router switched off
Network timeout
Problem past router - no response
being received from network
Streaming IR station and
suddenly station becomes
unavailable