LENCO Classic Phono TCD-2550, Руководство пользователя

Страница: 10 / 79

9
NOTE: Do not turn or stop the turntable manually. Moving or jarring the turntable without
securing the tone arm clamp could result in damage to the tone arm.
TO USE THE RADIO
1.
Press the [POWER] button (2) to turn ON the unit;
2.
Select the desired audio source by pressing the [SOURCE] button (7 to 11);
3.
(Please see detailed instructions for each Source in the following chapters);
4.
Adjust the volume with the [VOLUME KNOB] (3) to the desired level;
5.
Press and hold the [POWER] button (2) to turn OFF the unit.
Note: When no sound is produced, the unit will switch OFF automat. after 10 minutes.
RADIO OPERATION
1.
Press the [AM] or [FM] button (7 or 8);
2.
Adjust radio frequency to your desired station by turning the [TUNING KNOB] (19).
Note: For a better reception FM move the wired antenna (23) around.
For MW reception the signals are picked up through a built-in ferrite antenna. You may
have to orient the unit to obtain the best reception.
TURNTABLE OPERATION
Note: When using the turntable for the first time, turn the [TRANSPORTATION LOCK SCREW]
(26) clockwise until fully screwed in.
1.
Press the [PHONO] button (11);
2.
Place a record on the turntable. Place the EP adapter over the central spindle
when playing 45 rpm records;
3.
Set the [SPEED SELECTOR] (30) to 33, 45 or 78 rpm according to the record;
4.
Release the [TONEARM CLAMP] (28), and remove the stylus protector;
5.
Lift up the [TONEARM] (27) with the [LIFT LEVER] (30);
6.
Move the [TONEARM] (27) to the beginning of the record;
7.
Lift down the [TONEARM] (27) with the [LIFT LEVER] (29);
8.
When the record is finished the [TONEARM] (27) will automatically return to the
rest support and the [PLATE] (25) will stop turning. To stop manually, lift up the
tonearm from the record and return it to the rest support.