9
Bluetooth®
All of the functions below only work when in Bluetooth® mode with another device paired to the tower.
Music playback
Press the
play button
on the tower or remote control to start music playback.
button
, press this button on the tower or remote control to go to the next
song.
button
, press this button on the tower or remote control to go to the previous
song.
/ - buttons
, press the button on the tower or remote control
to increase the volume. Press the volume
– button on the tower or remote control
to decrease the volume.
Mute button
on the tower or remote control. Press this button to turn off the
volume. Press it again to turn on the volume.
FM Radio
When the device is enabled, press the radio button on the tower or remote control to enter
the radio mode.
Finding channels:
Hold the / - buttons or the
/
buttons until the frequency on the display starts
changing. The tower will now search for the nearest channel with a good reception. Once the
channel is found, the tower will stop at this frequency.
To manually search, briefly press the / - buttons or the
/
buttons. Each press
will change the frequency by 0.05mHz.
Saving channels:
Tune to the frequency that you want to save.
Press the MEM button on the remote control, the preset station number will start blinking on
the display.
Use the CH + / - buttons to select the desired station number, once the desired channel has
been reached, press the MEM button to save the channel.
Recalling preset stations:
Press the CH + / - buttons to browse through the preset stations. The number of the preset
station will be displayed on the display briefly.
AUX
Use the AUX connection to connect external audio sources that don’t support Bluetooth® to
the tower. Press AUX on the tower or on the remote control to enter the AUX mode. When
AUX mode is active you can only control the volume with the Lenco device. All other
functions need to be operated from the external device.
Sleep timer
This feature will turn off the device after a preset time (of up to 90 minutes). To activate the
sleep timer mode repeatedly press the button on the remote control until the desired sleep
time is reached. The sleep time can be set to 15, 30, 45, 60 and 90 minutes. Take note that
the sleep timer doesn't turn off the external audio device.
