3
REMOTE CONTROL
1. TONE/CH+ BUTTON
2. VOLUME-/STOP BUTTON
3. TUNING- & PREVIOUS/FAST BACKWARD
BUTTON
4. BT PAIR & PLAY/PAUSE BUTTON
5. STANDBY/MUTE BUTTON
6. FUNCTION/CH- BUTTON
7. /INFO BUTTON
8. & NEXT/FAST FORWARD
BUTTON
9. MEMORY/RANDOM BUTTON
Installation
AC POWER CONNECTION
1. Plug one end of the AC cord into the AC socket on the unit
2. Then connect the other end to the main power.
NOTE: During playback, if not any operation in about 6 hours, the unit will switch to standby mode
automatically.
Bluetooth® operation
BLUETOOTH® CONNECTION
This unit can receive stereo audio signal from a Bluetooth® stereo audio source device.
1. Press the POWER ON/OFF button on the unit, then press the STANDBY button to power on the unit.
2. Press the FUNTION button on the remote or the MODE button on the unit repeatedly to switch to the
Bluetooth® mode (“PAIRING” shows on the screen).
3. LED indicator blinks rapidly while it is pairing.
4. Pair and connect to Lenco BTT-100 on the Bluetooth® audio source device. If prompted for
passcode, enter “0000”.
5. Pairing successful (LED indicator turns to solid blue), ready to stream music.
6. Press PLAY/PAUSE button to pause or start the playback.
7. During playback, press the NEXT/PREVIOUS button to skip forward or backward.
Note:
Pairing mode is canceled in about 1.5 minutes.
The above are generic steps to pair a Bluetooth® device, for more specific instructions on
Bluetooth® connectivity for your device, please consult your manufacturer’s manual.
After the first connection, the unit will detect your last paired Bluetooth® device and connect to it
automatically.
BT
1
2
3
4
5
6
7
8
9
