SERV & TWIST “1000”
©™®
User’s Manual
Len Matec bvba
8
2.3
Other aspects to consider in terms of safety
-
DO NOT OPEN
housing of the control panel when under voltage
- When the house of the control panel is open, do not put any voltage on the device
- Cooling openings in the control panel must remain free, not sealed, etc.
-
DO NOT INSERT
objects through the openings of the cooling ribs
- Test the emergency stop sporadically for its function
-
UNPLUG
power unit before replace fuses on the control panel.
- When replacing fuses, only fuses of the exact same type may be used. There are
always reasons why a fuse blows.
Always look for the reason why a fuse blows before replacing it
- Replacing a blown fuse repeatedly may cause damage to the S&T in the long term
