Proprietary & Confidential
-27-
15.2.9
UART setup
Select SIM card 1 or SIM card 2, the settings used to determine the current UART port which
accepts AT is used by SIM 1 or SIM 2.
15.2.10
Misc. settings
Set LCD backlight.
15.3
Network setup
Set the network selection mode. Select “SIM1 network setup” or “SIM2 network setup”.
Network selection
New Research: search new network.
Select network: search new network, and show the network list.
Selection Mode: set “Automatic” or “Manual”.
Preferred networks:
set the preferred network.
15.4
Security setup
The menu allows encrypting with some phone functions. It can avoid your phone or SIM card
misused. When you input password, the password will be shown with “*”. If input wrong number,
press end key to clean. You can change PIN1, PIN2, or phone lock password and so on.
15.4.1
SIM1 security setup
15.4.1.1
SIM1 lock
If activate SIM1 lock, before you use SIM1 card, you need input correct PIN.
15.4.1.2
Fixed dial
If your SIM1 card support, you can set the fixed dial number. If the function is activated, you
can only dial the number in the fixed dial list. Before enable the feature, need input PIN2.
Enter fixed dial list, you can add, edit the number. When save the number, need input PIN2.
※
Note:
For avoiding change the fixed dial status by others, after setting, please power off then
power on.
15.4.1.3
Barred dial
If your SIM1 card support, you can set the barred dial number.
15.4.1.4
Change password
The menu can change SIM1 card PIN, PIN2 password. After input correct password, enter
new password for two times.
15.4.2
SIM2 security setup
Please refer to “
SIM1 security setup
”.
15.4.3
Phone lock
If activate Phone lock, before you use phone, you need
to
input correct phone password.
15.4.4
Auto keypad lock
Set the keypad lock mode. You can activate or disable the function.
