Proprietary & Confidential
-14-
Making a Conference Call:
1) Call the first participant in the normal way.
2) Call the second participant in the normal way. The first call is automatically put on hold.
3) To join the first participant to the multiparty call, press middle key to access <Option>:
Swap: swap the speaking party.
Conference: add incoming callers or a new person to the multiparty call.
End single call: end the specific connected call.
End all calls: end all calls.
Transfer: assign the specific call to divert.
New call: make a new call.
Phonebook: enter the phonebook menu.
Message center: enter Message center menu.
Mute: open or close the microphone.
DTMF: activate the sending of the DTMF signal, or clean the sending.
4) To add a new person to the multiparty call, call the person in the normal way, then press
middle key
to access <Option>, and select “Conference”.
5) You can add incoming callers by answering the call and pressing <Option>, followed by
“Conference”. Repeat as required.
6) During the conference, press middle key to select:
Hold/Retrieve conf.call: during the conversing with multiparty, if new call comes, hold
the conversing call, answer the new call.
Split: separate one part from multiparty calls for alone converse.
End single call: end the specific call.
End conf. calls: end all the calls.
New call: input new phone number, press middle key to save number to phonebook,
and press dial key to call the new number.
Phonebook: enter phonebook menu.
Message center: enter Message center menu.
Mute: open or close the microphone.
DTMF: activate the sending of the DTMF signal, or clean the sending.
※
Note:
Multiparty Call requires network support.
7
Messages
7.1
SMS
SMS is short message, this menu allows you to read, compose, send and receive text
messages. Each message has limitation in length, that is 612 English characters. If exceed the
limitation, the message will be cut to many messages for sending.
Screen icon
that displays in standby mode refers to any new message just received and
unviewed. You can set the message tone to remind you of receiving any new message. No more
messages can be received when the Inbox is full. You can receive the new message after you
have deleted some old ones to release memory space.
7.1.1
Write message
Write new message for sending. During editing the message, press middle key to operate:
SIM1 done:
finish edit and send the message by SIM1 card.
SIM2 done:
finish edit and send the message by SIM2 card.
Use templates:
select the template message from the template list.
Insert number:
insert the contact number from phonebook into message.
Insert name:
inset the contact name from phonebook into message.
Insert bookmark:
insert bookmark into text.
Input method:
select input method.
After editing the message, select “SIM1 done” to access:
Send only:
send the message to one person.
Save and send:
send the message and save it to Outbox.
Save:
save the message to phone.
Send to many:
send the message to many.
