LEMKEN Thorit 9 K, Руководство по эксплуатации

Страница: 40 / 49

38
12.2 Bolts
All nuts and bolts must be tightened after the first few hours of use, at least
within the first 8 hours and checked, and tightened if necessary. At least every
50 hours all bolts must be checked and tightened if necessary and secured
with Loctite.
12.3 Wearing parts
Worn hollow discs, outer discs a.s.o. must be replaced in time, so that the car-
rying parts will not be damaged or worn.
IMPORTANT: Do not clean this implement with a Pressure Washer during
the first 6 weeks. After this time a minimum nozzle distance of
60 cm must be observed with a maximum 100 bar and 50 ° C
temperature!
• Read and adhere to the General Safety Instructions as well
as to the Instructions „Maintenance“!