LEMKEN Thorit 9 K, Руководство по эксплуатации

Страница: 27 / 49

25
8 ADJUSTMENTS
8.1 Working depth of the tines
After raising the implement some
cm the working depth of the tines
will be adjusted as follows by me-
ans of the pin adjuster (V1):
Placing the lower pin (S1) in a de-
eper hole
=> increased working depth.
Placing the lower pin (S1) in an
upper hole
=> reduced working depth.
With the upper pins (S2) the clearance between the ground and the rollers
will be adjusted with raised cultivator.
If with raised cultivator the rollers are still touching the ground or are too close
to the ground, then with fully lowered cultivator the pins (S2) must be placed
in a lower hole above the carrier (S3).
8.2 Tine position
The tine position respectively the
shares of the implement can be al-
tered. A flat share position redu-
ces the traction requirement; a
steep share position ensures a
good penetration, even in hard
and dry soil conditions.
The tine (H0) position and thus the
position of the point (H2) will be al-
tered by repositioning the shearbolt (H1).