Switching over to different share systems
82
11.3.3 Attaching the share base
The share base (2) is attached to the tine (1) in reverse order to its removal.
When the implement has been lifted out, it must be secured with
the aid of a suitable support to prevent it from unintentionally
dropping.
Push the share base (2) from below onto
the tine (1).
Ensure that the reinforcing struts of the
share base (2) engage first in the notch
(7) and then in the notch (8) of the tine
(1).
In doing so, press the guide plate (6) up
against the tine (1) to keep the share
base (2) locked in position and prevent it
from falling down.
Push the linch pin (3) between the guide
of the share base (2) and the tine (1).
The linch pin (3) holds the share base (2)
in the detent position.
The securing clip prevents the linch pin (3)
from slipping out.
Fold the securing clip (5) downwards.
When all share feet have been attached,
lift out the implement slightly to relieve
the support.
Remove the support and store it until the
next time the implement is switched
over.
3
1
8
7
6
2