Entering values
25
5.3 Input dialog box for list selection
If a value is selected in the
control screen
, which can only accept a series of
specified values then this list selection input dialog box appears.
Proceed as follows to select a specified value from a list:
1. Choose the value to be changed in the control screen.
To do so, simply press the value in the touch screen
- or -
turn the scroll wheel until the value turns white and then push the scroll wheel.
2. The list selection input dialog box is opened.
3. Select the new value from the list by turning the scroll wheel
- or -
Pull the scroll bar on the right side of the list up or down until the required list value is reached.
Select the desired entry by pressing on the touch screen.
4. You can exit the input dialog box by pressing either OK or ESC.
Figure 11: Input dialog box for list selection
