Commissioning
11
3 COMMISSIONING
3.1 Installation in the cab
The device holder for fastening the
terminal
in the tractor cab is part of the de-
vice's package contents.
3.2 Connector in agricultural tractor
3.2.1 ISOBUS connector
The connection to the ISOBUS is made using a 9-pin connector (ISO 11783). The
power supply to the terminals is also connected through this connector.
1
4
7
3
6
9
Figure 2: View and pin assignment for ISOBUS connector
3.2.2 Signal socket
The pulses for the current speed are sent over the 7-pin connector (DIN 9684-
1/ISO 11786) to the terminal. These are required if the TECU software (tractor
ECU), which is part of the terminal delivery package, is to be used. To to do, the
connector is fitted to the cable bearing the LEMKEN art. no. F42 0170.
