LEMI CAPRI PEDI SPA, Инструкция по эксплуатации

Страница: 9 / 60

9
3. OPERATING PROCEDURES
3.1. Filling the basin:
3.2. Use and maintenance of the equipment
AUTOMATIC FILLING OF THE BASIN AND
HYDROMASSAGE ACTIVATION (ONLY FOR CAPRI PEDI SPA)
Press the AUTO FILL button to automatically fill the basin
(sensor up to the set level).
When water reaches the level, the water outlet stops and the jet of
air (hydro massage) activate automatically.
MANUAL FILLING OF THE BASIN (ONLY FOR CAPRI PEDI SPA)
HYDROMASSAGE
HYDROMASSAGE (FOR ELBA PEDI SPA)
To activate the hydromassage press the button with the PUMP icon,
once the water has reached the magna jet level.
To activate the hydromassage on Elba Pedi Spa , press the whole
button.
Press the TAP button for manual filling. To stop the water outlet,
press again the tap button.
THE WATER LEVEL MUST ALWAYS COVER
THE HYDROMASSAGE MAGNA JET.
Before filling your Capri Pedi Spa/Elba Pedi Spa with water, make sure the basin is clean and sterilized and
that any debris is inside the basin to avoid the risk of scratching the acrylic surface.
Open the water tap and adjust the water temperature by turning it on the right for hot water, and left for
cold water.
DO NOT ACTIVATE THE HYDROMASSAGE PUMP WITHOUT WATER.
THE WATER LEVEL MUST ALWAYS COVER THE HYDROMASSAGE MAGNA JET.