DTV -
Headend
| MLH-300
Manual
© 2020 Lemco. All rights reserved.
17
The status section in (Figure No 10) provides a general idea to the user of the current payload (according to the
selected programs) comparing to the max. output payload.
It is recommended that the user must not exceed the 85% from each output, since all the bitrate are variable
according to their specific content.
4.2.8 - “IP streaming” page
At “IP streaming” section the user is able to setup the IP streamer of the device (Figure No 11).
In Figure No 11 we have general settings of the IP streamer as follows:
•
IP address: This is the IP address of the streamer for ping purposes.
•
MAC address: This is the MAC address of the streamer
•
Figure No 10
•
Figure No 11