manualshive.com logo in svg

Lemco micro line MLF-200, Руководство пользователя

Поделиться
Скачать
Lemco micro line MLF-200 Скачать руководство пользователя страница 13

DTV - 

Headend 

| MLF-200

Manual

© 2020 Lemco.  All rights reserved.

13

Tuner status

For each input the MLF-200 provides several information such as tuner status (Locked/Unlocked), total bitrate, 

signal strength, quality etc. 

4.2.5 - “TS configuration” page

At the “TS configuration” page (Figure No 5) the user is able to setup the by-pass mode of the device.

Bypass Mode

With the term “Bypass” we mean that the device is able to receive the transport stream (TS) from one input and 

send it to one output (modulator) without doing any kind of multiplexing. In this case, all PIDs or programs are not 

able to be changed and there are transfer transparently to one output. 

The user is able to select if Input No 1,2,3 or No 4 wants to be send to Output No1,2,3 or No4 respectively using 

bypass mode by selecting the appropriate check box. (Figure No 5)

• 

Figure No 5

Содержание micro line MLF-200




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды