TPG10 User Manual
Version GS 1607
24
Version GS 1607
To check the grounding condition, this Analyser will measure the resistance from the engine body
contact to the battery terminal then it will display the results and the recommendations.
Start Testing
1.
Make sure that the engine is switched OFF. Attach the clips onto the battery terminal posts
and the analyser will power up and lights up the LCD display screen as shown below.
2.
From the main MENU, select
by scrolling left using
keyto go to screen Fig.57.
Fig.57
Press
key to continue and the display will show: (Fig.58&59)
Fig.58
Fig.59
Now transfer the BLACK tester clip from the battery [-] terminal to a suitable position on the
engine or chassis body leaving the RED clip still attached to the battery [+] terminal as shown
above.
3.
As soon as the BLACK tester clip is attached to the engine body, the display will show: (Fig.60)
which means that the user need to press
key to continue.
Grounding Test
Flashing
alternately
Wake up screen
Select Continue test
and press
key
Select Automotive
and press
key