TPG10 User Manual
Version GS 1607
13
Version GS 1607
Fig.27
3.
Before selecting [WET] or [AGM] and the ratings ‘CCA, SAE, EN, IEC, DIN, CA and JIS#’ from
the menu, please check the battery model. This can be obtained from the battery labels as
some of the examples shown below:
With the battery model in hand, refer to the Battery rating chart (as seen in this example Fig.28
below) providedin separate copies with the Tester when purchased,to get values to be keyed
in.
Fig.28
4.
Once the battery type[SLI (WET)] or [AGM] has been selected, it will proceed to the display as
shown below (Fig.29):
Fig.29
5.
To adjust the CCA value, press
or
key will decrease or increase the value by 100 while
or
key will increase or decrease the value by 5 as shown in Fig.30 below.