LEMAN TAB085, Руководство пользователя

Страница: 51 / 60

11
VARIABLE SPEED WOOD LATHE
Assembly, Continued
Faceplate Installation

Remove the headstock spur from the
spindle by using the push-out rod.

Thread the 4” diameter faceplate
onto the spindle and tighten with the
supplied wrenches.

Mount your workpiece to the
faceplate using flat head brass
screws. Be certain that the ends of
the screws will not interfere with your
planned turning.
Extension Bed

The extension bed is attached to the
left of the headstock for outboard
faceplate turning when the use of the
articulated tool rest is required.

If outboard faceplate turning does
not require the use of the tool rest,
do not attach the extension bed until
required.

To attach the extension bed (1) to
the lathe bed, align the bolt holes (2)
with the threaded bed holes (3).

Install a lock washer (4) onto an Allen bolt (5).

Finger tighten and then secure tightly with the Allen key provided.
DO NOT ATTEMPT TO OPERATE YOUR LATHE UNTIL IT IS COMPLETELY
ASSEMBLED AND ADJUSTED ACCORDING TO THE INSTRUCTION
MANUAL.
EN