LEM 602SS, Использование и обслуживание

Страница: 2 / 2

LEM Products • 109 May Drive, Harrison, OH 45030 • PH: 1-877-536-7763 • www.lemproducts.com LEM Products • 109 May Drive, Harrison, OH 45030 • PH: 1-877-536-7763 • www.lemproducts.com
2 3
SAFETY INSTRUCTIONS
Important: Thoroughly hand clean all parts before first use in warm soapy water, to remove the
lubricant applied during manufacturing. Rinse and dry thoroughly.
Read these instructions before operating meat tenderizer.
1. Remove the tenderizer attachment from the motor when not in use.
2. Never operate unit without the cover being in place. The rolling action of the knives could
pull fingers and hands into the knives and cause serious injury.
3. Never leave tenderizer unattended when in use or plugged in.
4. Keep out of reach of children.
5. Drop meat through the opening of the cover. DO NOT attempt to force meat into the opening.
Rolling action of the knives will carry appropriately sized portions of meat into the unit.
6. Use boneless cuts of meat only. Meat should not exceed ¾” in thickness. Remove gristle before
tenderizing to eliminate clogging or stalling. To experience the maximum tenderness, run meat
through tenderizer twice at 90 degree angles.
KEEP HANDS A SAFE DISTANCE FROM THE
EXPOSED BLADES ON THE BOTTOM OF THE UNIT.
5
14
17
7
6
7
16
7
11
12
8
10
9
15
17
17
7
17
13
16
5
15
7
4
17
7
3
2
1
PARTS LIST FOR 602SS MOTOR
PARTS LIST FOR 602SS MEAT TENDERIZER
# Description Q’ty
1 Combs 2
2 Thumb Screw 2
3 Upper Case 1
4 Driven Cutter Shaft 1
5 Sleeves 4
6 Knife 30
7 Spacer 62
8 Lower Case 1
9 Hub 1
# Description Q’ty
10 Hub Screw 2
11 Drive Shaft 1
12 Connect Screw 1
13 Drive Cutter Shaft 1
14 Gear 2
15 C Ring 4
16 E Ring 4
17 Stainless Steel Washers 6
# Description Q'ty
15 Star Bolt 1
16 Allen Screws M6 for Front Panel 4
17 Front Panel 1
18 Grease Seal 1
19 Roller Bearing 1
20 Main Washer 1
21 Main Gear 1
22 Bearing 3
23 Rubber Pad 1
24 Screws 10
25 S/S Upper Housing 1
26 Handle Screw 2
27 Handle 1
28 Back Panel 1
29 Circuit Breaker 1
# Description Q'ty
30 Fastener for the Power Cord 1
31 Power Cord 1
32 Brace 1
33 Allen Screw M6 for Brace 2
34 S/S Lower Housing 1
35 Switch 1
36 Plastic Feet 4
37 Allen Screw M4 6
38 Phillips Screw M4 for Feet 5
39 Step Gears 1
40 Clip Spring 1
41 Pinion Gear 1
42 Front Panel of the motor 1
43 Electric Box 1
44 Motor 1