Select
SNBR.
The number displayed on the right is
the univocal serial number of the product.
RESET
>SNBR: 00001
EXIT
EXIT
YES NO
RESET?
YES NO
RESET OK
RESET DSP30-4G
S/N DSP30-4G
EXIT
To restore the default settings select
RESET
and
confirm
YES
pressing
⏎.
The display will show
RESET OK
for a few second to confirm the operation.
If you wish to skip the
RESET
select
NO
and press
⏎
to confirm.
To end the programming procedure select
EXIT
and press
⏎.
Select
YES
to exit programming
mode and press
⏎
to confirm.
To carry on with the programming, select
NO
and
press
⏎
to confirm.
THR: 55dBuV
>RESET
MONITOR
RESET
>MONIT: OFF
The
MONITOR
function activates a real time
monitoring procedure which check that the input
level of each selected MUX is greater than the
entered
THR
input threshold. If the measured level
of a MUX is lower than the T
HR
threshold, the
corresponding filters are automatically deactivated.
When the input level of the deactivated MUX return
above the minimum threshold level
THR
the filter
will be automatically reactivated.
Please use the MONITOR function
with maximum care.
Please note the RESET restore all the
settings to default.
Содержание DSP30-4G
Страница 2: ......
