LELY SHUTTLE XY, Руководство оператора

Страница: 23 / 63

Description and Operation 4-1
D-H021.1011EN
innovators in agriculture
4. DESCRIPTION AND OPERATION
4.1 Description
The SHUTTLE has the following main parts:
•
Stainless steel base
•
Stainless steel cover with a transparent plastic top
•
Sample box, with bottles
•
Fill unit
•
Operator panel.
The stainless steel base has two wheels and a transport handle (9, fig. 3,
page 4-2). Holes in the bottom plate let water or milk drain. A hinged
cover (1) is installed on the base with two dampers (15) to keep the
cover open when it is opened. The cover is closed with two fasteners (11)
that can be locked.
A lip (18) on the cover makes sure that the cover can not be closed if the
sample box and racks are not installed correctly.
The sample box (10, fig. 3, page 4-2) is installed on the base on plastic
supports. The sample box has room for ten trays with ten bottles each.
An identification chip is installed on each tray. Two stainless steel racks
keep the trays and the bottles in place and the lids in the correct
position. The sample box can only be installed in one way in the
SHUTTLE.
The milk tube connection (7) and the bleed tube strip (4) are installed on
the right of the cover.
The fill unit is installed on a spindle that moves the fill head (17) from its
home position on the drain (14) to the requested bottle (X and Y-axis). A
spindle for the Z-axis moves the fill head up and down. The spindles are
driven by an electro motor. The fill head has an electronic level sensor
and a mechanical valve. The electronic level sensor has two level
measure pins (16).
A syringe (12) for cleaning is installed on the base.
The operator panel is on the cover, with the CAN-bus cable (5) and the
E-Link connector (6) (for service only). The operator panel has a 7-
segment display (2) and a soft-button (3).