Pag. 4
PA70N English
COMPONENTS:
1.
Vacuum pedal
2.
On/off switch
3.
Boiler support
4.
Catch tray
5.
Handle
6.
Legs
7.
Working surface cover
8.
Motor
9.
Socket with safety door
USER INSTRUCTIONS:
1.
Unfolding: Hold the ironing board in a vertical position with the tip downwards; press the
handle (5) placed underneath the board and lift up the working surface by pulling with the foot
outwards until the desired height is reached.
2.
Unfold the boiler support (3) and place the steam generator on the shelf.
3.
Insert the electrical plug into an electrical outlet.
4.
Insert the iron plug into the socket with safety door (9) placed under the control box.
5.
Place the pedal (1) near the working area.
6.
Push the on/off switch (2) on the “I” position.
7.
Wait for a few minutes until the working surface is warmed up.
8.
Start ironing.
9.
The vacuum function is controlled by the pedal (1)
10.
You can use the vacuum function (see point 9) at the same time as you are ironing, or you can
use it after the ironing (for very light fabrics this may be the preferred way).
11.
At the end of the ironing we suggest you leave the on/off switch (2) on for a few minutes to
ensure the inside of the table is dry and free of condensation.
12.
Folding: turn the on/off switch (2) off, remove the plug from the outlet. Take the boiler and
the iron off of the boiler support (3), fold the boiler support (3), and make sure there is no
garment on the working surface and/or on the catch tray (4).
13.
As soon as the working surface is cool, position the ironing board vertically with the tip
downwards, press the handle (5) placed under the working surface and at the same time pull
the legs (6) inward.
MAINTENANCE:
We suggest checking the ironing board cover (7) periodically and, if it is necessary, replacing it with
an original one (code PA019).
TECHNICAL DATA:
Voltage: 220V-230V
–
50Hz // 120V - 60 Hz
Working power: 700 W
Power of heating element: 600 W
Working surface : cm 125 x 40
The inserted data and pictures can be subject to changes without previous notice for the improvement of the
machine’s performances.
