5
Punching and Binding
Selecting and Inserting the Wire Comb
Determine the required comb size using the table in
•
this manual.
Insert the wire comb with the open side facing
•
upwards into the hook of the wire comb holder
C
.
Punching
Turn the adjustment knob
•
G
to “Punch Point”.
The sheets are only correctly punched in this position.
Tip: Test the punching result initially with a blank sheet of
paper before you punch the original.
Place the sheets in the punching channel
•
B
.
Press the lever
•
down and then raise it again.
Remove the punched sheets.
•
Inserting Punched Sheets
Insert the punched sheets into the wire comb.
•
You can now punch all the remaining sheets and insert them
into the wire comb.
Closing the Wire Comb
Please note that once a wire comb has been closed it can
only be opened again by destroying it.
Turn the adjustment knob
•
G
to the comb size being
used.
The setting is important so that the wire comb can be
correctly closed.
Remove the wire comb together with the inserted
•
sheets from the wire comb holder.
Place the sheets with the open side of the wire comb
•
facing downwards in the wire comb closer
.
Press the binding lever down slowly as far as it will
•
go and then raise it again.
Remove the bound document.
•
Specifications
Mode of operation
Manual
Paper format
A4
Punching blades
34 (3:1 pitch)
Punching capacity
15 sheets of paper (80 g/m²) or
2 transparent films (0.2 mm)
Wire comb size
6–14 mm (up to 120 sheets)
Net weight
7.3 kg
Dimensions (B x D x H)
400 mm x 330 mm x 350 mm
Subject to technical modifications without notice.
3 year guarantee
To be returned with the unit if defective.
LEITZ units are sold with a 3 year guarantee.
The conditions of the guarantee period of 3 years are as
follows:
Each unit is guaranteed against all defects in material
1.
and/or workmanship for a period of 3 years from the
date of purchase.
No unit will be accepted without written notification
2.
from the customer giving details of the problem that
has occurred, and proof of the date of purchase.
All units for repair are to be returned to Esselte with
3.
adequate packaging. No liability will be accepted
by Esselte for goods damaged in transit from the
customer, due to inadequate attention to packaging.
The supplier will be responsible for all parts and labour
4.
charges as necessary to the unit. The 3 year guarantee
is subject to the following conditions:
That the unit has been used strictly in accordance
a)
with the operating instructions supplied with the
unit.
That if the benefit of this guarantee is sought, the
b)
unit must be returned, carriage paid to Esselte.
Esselte does not accept responsibility for loss or
damage in transit.
That the guarantee is invalid if the defects are
c)
found to be caused by accident, misuse, alteration
or neglect.
That no liability of Esselte is to be implied here
d)
for damage, loss or expense of any kind resulting
from, consequence upon, or in any way due
to any fault whatsoever in the instrument or its
accessories.
That this guarantee does not affect you statutory
e)
rights as a consumer.
Date of Purchase:
Model No. Serial No.:
Company Name:
Contact person:
Address:
Telephone/Fax No:
ESSELTE UK Ltd.
Esselte Ireland Limited
Waterside House, Cowley Business Park,
Westlink Industrial Estate,
Uxbridge, Middlesex,
Kylemore Road,
UB8 2HP
Dublin 10
UNITED KINGDOM
IRELAND
Tel.: 0870 9090609
Tel: +353-1-6268438
Fax: 01895 878901
Fax: +353-1-6269798
www.esselte.ie
