7
2.
Setup
•
Connect the power adaptor supplied with the product to the base unit.
The base power LED will light.
NOTE: The first time you use your headset, it is recommended that the headset is charged
for a minimum of 4 hours before use.
2.1 Connecting to a telephone or terminal with a headset port
•
Using the headset cord supplied with the product, connect the ‘TEL’ port on headset
base with the headset port on your telephone.
•
Use the power adaptor supplied with the product to connect the headset base to a
power socket.
•
You may need to adjust the wiring switch that is located on the bottom of the
headset base to find the correct wiring for your device.
2.2 Connecting to a telephone or terminal without a headset port
•
Using the headset cord supplied with the product, connect the ‘TEL’ port on headset
base with the ‘handset’ port on your telephone.
•
Connect the telephone handset cord to the handset port on the headset base.
•
Use the power adaptor supplied with the product to connect the headset base to a
power socket.
•
You may need to adjust the wiring switch that is located on the bottom of the
headset base to find the correct wiring for your device.
2.3 Connecting to a compatible handset lifter (refer to your supplier)
•
Fit the handset lifter to your telephone as indicated in its user guide.
•
Connect the handset lifter to the ‘EHS’ port located on the back of the headset base.
NOTE: Charge your headset for 4 hours before you use it.
2.1 Connecting to a telephone with a headset port
•
Using the included connector cord, connect the ‘TEL’ port on the back of the
headset base with the headset port on your telephone.
•
Use the power adaptor to connect the headset base to a power outlet.
•
You may need to adjust the compatibility switch located on the bottom of the base
to find the correct setting for your device. The most common setting is 1.*
8
2.4 Connecting EHS with DHSG protocols (refer to your supplier)
•
Connect the DHSG cable to your telephone as indicated in its user guide.
•
Connect the DHSG cable to the ‘EHS’ port located on the back of the headset base.
With the handset lifter or DHSG cable connected, you will be able to answer and end calls
using the button located on the headset while away from your desk.
2.5 Connecting to a computer USB port
•
Connect the USB cable supplied with the product to the ‘USB’ port on the back of
the headset base and to a available USB port on your computer.
•
The computer should automatically recognise the device and install the correct
drivers. Wait a few seconds before using the headset.
2.6 Wearing style
The IPN W9xx series is available in three variants:
•
IPN W970 Over-the-ear
•
IPN W980 Over-the-head monaural
•
IPN W985 Over-the-head binaural
To replace the earplug of the IPN W970: twist the earplug 90 degrees and pull the earplug
towards you.
To replace the ear cushion of the IPN W980 or IPN W985: put your thumb on the top of the
speaker and carefully pull the ear cushion at the bottom towards you.
7
2.
Setup
•
Connect the power adaptor supplied with the product to the base unit.
The base power LED will light.
NOTE: The first time you use your headset, it is recommended that the headset is charged
for a minimum of 4 hours before use.
2.1 Connecting to a telephone or terminal with a headset port
•
Using the headset cord supplied with the product, connect the ‘TEL’ port on headset
base with the headset port on your telephone.
•
Use the power adaptor supplied with the product to connect the headset base to a
power socket.
•
You may need to adjust the wiring switch that is located on the bottom of the
headset base to find the correct wiring for your device.
2.2 Connecting to a telephone or terminal without a headset port
•
Using the headset cord supplied with the product, connect the ‘TEL’ port on headset
base with the ‘handset’ port on your telephone.
•
Connect the telephone handset cord to the handset port on the headset base.
•
Use the power adaptor supplied with the product to connect the headset base to a
power socket.
•
You may need to adjust the wiring switch that is located on the bottom of the
headset base to find the correct wiring for your device.
2.3 Connecting to a compatible handset lifter (refer to your supplier)
•
Fit the handset lifter to your telephone as indicated in its user guide.
•
Connect the handset lifter to the ‘EHS’ port located on the back of the headset base.
2.2 Connecting to a telephone without a headset port
•
Using the included connector cord, connect the ‘TEL’ port on the headset base
with the handset port on your telephone.
•
Connect the telephone handset cord to the handset port on the headset base.
•
Use the power adaptor to connect the headset base to a power outlet.
•
You may need to adjust the compatibility switch located on the bottom of the base
to find the correct setting for your device. The most common setting is 1.*
7
2.
Setup
•
Connect the power adaptor supplied with the product to the base unit.
The base power LED will light.
NOTE: The first time you use your headset, it is recommended that the headset is charged
for a minimum of 4 hours before use.
2.1 Connecting to a telephone or terminal with a headset port
•
Using the headset cord supplied with the product, connect the ‘TEL’ port on headset
base with the headset port on your telephone.
•
Use the power adaptor supplied with the product to connect the headset base to a
power socket.
•
You may need to adjust the wiring switch that is located on the bottom of the
headset base to find the correct wiring for your device.
2.2 Connecting to a telephone or terminal without a headset port
•
Using the headset cord supplied with the product, connect the ‘TEL’ port on headset
base with the ‘handset’ port on your telephone.
•
Connect the telephone handset cord to the handset port on the headset base.
•
Use the power adaptor supplied with the product to connect the headset base to a
power socket.
•
You may need to adjust the wiring switch that is located on the bottom of the
headset base to find the correct wiring for your device.
2.3 Connecting to a compatible handset lifter (refer to your supplier)
•
Fit the handset lifter to your telephone as indicated in its user guide.
•
Connect the handset lifter to the ‘EHS’ port located on the back of the headset base.
•
Ensure that the Accessory switch is set to RHL.
*We’d love to help you get set up! Call us at 1-800-432-3738, Mon-Fri 6:00-4:30 Pacific Time
•
Connect the handset lifter to the AUX port located on the back of the headset base.
9
3.
Operation
3.1 Making and receiving calls
3.1.1 Making an outgoing call in telephone mode
•
Ensure that the ‘TEL’ button on top of the headset base is selected.
•
Lift the headset from the base to start the call. If you are already wearing the headset,
press the headset’s ‘ON/OFF’ button. The base ‘Online Indicator’ LED will light. If a
handset lifter or electronic hookswitch device is connected to the headset base, the
line will be seized. Otherwise, you will also need to activate the headset port via your
telephone terminal.
•
Dial the telephone number on the telephone terminal
•
After finishing the call, replace the headset on the base or press the ON/OFF button to
disconnect. The ‘Online Indicator’ LED will turn off.
3.1.2 Receiving an incoming call in telephone mode
•
If there is an incoming call from the telephone line and the headset base is connected
to a handset lifter or electronic hook switch device, the ‘TEL’ LED and headset LED will
flash, also a ring tone will be heard on the headset.
•
Lift the headset from the base to answer the call. If you are already wearing the
headset press the headset’s ‘ON/OFF’ button. The base ‘Online Indicator’ LED will light.
If a handset lifter or electronic hookswitch device is connected to the headset base,
the line will be seized. Otherwise, you will also need to activate the headset port via
your telephone terminal.
•
To end the call, replace the headset on the base or press the headset ON/OFF button.
9
3.
Operation
3.1 Making and receiving calls
3.1.1 Making an outgoing call in telephone mode
•
Ensure that the ‘TEL’ button on top of the headset base is selected.
•
Lift the headset from the base to start the call. If you are already wearing the headset,
press the headset’s ‘ON/OFF’ button. The base ‘Online Indicator’ LED will light. If a
handset lifter or electronic hookswitch device is connected to the headset base, the
line will be seized. Otherwise, you will also need to activate the headset port via your
telephone terminal.
•
Dial the telephone number on the telephone terminal
•
After finishing the call, replace the headset on the base or press the ON/OFF button to
disconnect. The ‘Online Indicator’ LED will turn off.
3.1.2 Receiving an incoming call in telephone mode
•
If there is an incoming call from the telephone line and the headset base is connected
to a handset lifter or electronic hook switch device, the ‘TEL’ LED and headset LED will
flash, also a ring tone will be heard on the headset.
•
Lift the headset from the base to answer the call. If you are already wearing the
headset press the headset’s ‘ON/OFF’ button. The base ‘Online Indicator’ LED will light.
If a handset lifter or electronic hookswitch device is connected to the headset base,
the line will be seized. Otherwise, you will also need to activate the headset port via
your telephone terminal.
•
To end the call, replace the headset on the base or press the headset ON/OFF button.
•
Press the headset’s ON/OFF button. The base’s Online Indicator LED will light.
•
If a handset lifter or electronic hookswitch device is connected to the headset base,
the line will be engaged automatically. Otherwise, you will need lift the headset of your
telephone or activate the headset port on your telephone.
•
To end the call, replace the headset on the base or press the ON/OFF button. If you do
not have an EHS cable or a handset lifter, you will need to manually disconnect the line.
•
Press the headset’s ON/OFF button. The base ‘Online Indicator’ LED will light.
•
If a handset lifter or electronic hookswitch device is connected to the headset base,
the line will be engaged automatically. Otherwise, you will need lift the headset of your
telephone or activate the headset button on your telephone.
•
Dial the number you’re calling.
•
After finishing the call, press the headset ON/OFF button to end the call if you have
a handset lifter or EHS cable. Otherwise, just hang up the phone manually.
3.2
3.3
10
3.1.3 Making an outgoing call in USB/PC mode
•
Ensure that the ‘PC’ button on the top of the headset base is selected.
•
Lift the headset from the base or press the headset’s ON/OFF button if you are already
wearing it and the base ‘Online Indicator’ LED will light.
•
After finishing your VOIP call, press the ON/OFF button to disconnect. The base
‘Online Indicator’ LED will turn off.
3.2 Adjusting the ringing volume
When the headset is ringing to indicate an incoming call, you can adjust the ring volume
with the volume control buttons located on the headset.
3.3 Muting the headset microphone
To mute the headset microphone when on a call, press the mute button on the headset.
While the headset is in mute mode, a short beep will be heard on the headset every 8
seconds. Press the mute button again to release the mute.
3.4 Headset transmitting volume setting
You can adjust the transmit volume of the headset by using the two buttons
located on the bottom of the headset base.
3.5 Adjusting headset receive volume
Use the volume control buttons on the headset to adjust the receive volume of your head
-
set. You will hear a beep sound for each volume step up or down.
3.4
•
If there is an incoming call and the headset base is connected to a handset lifter or
electronic hookswitch device, the TEL light and headset light will flash, and a ring
tone will be heard on the headset.
•
Ensure that the TEL button on top of the headset base is selected.
•
Press the headset’s ON/OFF button. The base’s Online Indicator will light.
the line will be engaged automatically. Otherwise, you will need lift the handset of
your telephone or activate the headset button on your telephone.
•
Ensure that the PC button on the top of the headset base is selected.
•
Lift the headset from the base, or press the headset’s ON/OFF button if you are
already wearing it, and the base’s Online Indicator will light.
•
After finishing your call, press the ON/OFF button to disconnect. The base’s
Online Indicator will turn off.
the line will be engaged automatically. Otherwise, you will need lift the handset of
your telephone or activate the headset button on your telephone.
7
8
6
7
7
2.
Setup
•
Connect the power adaptor supplied with the product to the base unit.
The base power LED will light.
NOTE: The first time you use your headset, it is recommended that the headset is charged
for a minimum of 4 hours before use.
2.1 Connecting to a telephone or terminal with a headset port
•
Using the headset cord supplied with the product, connect the ‘TEL’ port on headset
base with the headset port on your telephone.
•
Use the power adaptor supplied with the product to connect the headset base to a
power socket.
•
You may need to adjust the wiring switch that is located on the bottom of the
headset base to find the correct wiring for your device.
2.2 Connecting to a telephone or terminal without a headset port
•
Using the headset cord supplied with the product, connect the ‘TEL’ port on headset
base with the ‘handset’ port on your telephone.
•
Connect the telephone handset cord to the handset port on the headset base.
•
Use the power adaptor supplied with the product to connect the headset base to a
power socket.
•
You may need to adjust the wiring switch that is located on the bottom of the
headset base to find the correct wiring for your device.
2.3 Connecting to a compatible handset lifter (refer to your supplier)
•
Fit the handset lifter to your telephone as indicated in its user guide.
•
Connect the handset lifter to the ‘EHS’ port located on the back of the headset base.
8
2.4 Connecting EHS with DHSG protocols (refer to your supplier)
•
Connect the DHSG cable to your telephone as indicated in its user guide.
•
Connect the DHSG cable to the ‘EHS’ port located on the back of the headset base.
With the handset lifter or DHSG cable connected, you will be able to answer and end calls
using the button located on the headset while away from your desk.
2.5 Connecting to a computer USB port
•
Connect the USB cable supplied with the product to the ‘USB’ port on the back of
the headset base and to a available USB port on your computer.
•
The computer should automatically recognise the device and install the correct
drivers. Wait a few seconds before using the headset.
2.6 Wearing style
The IPN W9xx series is available in three variants:
•
IPN W970 Over-the-ear
•
IPN W980 Over-the-head monaural
•
IPN W985 Over-the-head binaural
To replace the earplug of the IPN W970: twist the earplug 90 degrees and pull the earplug
towards you.
To replace the ear cushion of the IPN W980 or IPN W985: put your thumb on the top of the
speaker and carefully pull the ear cushion at the bottom towards you.
2.4 Connecting an electronic hookswitch (EHS) cable
•
Connect the EHS cable to your telephone as indicated in its user guide.
•
Connect the EHS cable to the AUX and TEL ports on the back of the headset base.
•
Refer to the user guide for the EHS cable for the correct setting of the Accessory
selection switch.
With the handset lifter or EHS cable connected, you will be able to answer and end calls
using the ON/OFF button located on the headset, while away from your desk.
2.6 Replacing the earpad
To remove the earpad(s) of the LH270 or LH275, put your thumb underneath the pad and
pull up from the bottom. To replace the earpad, match the notches at the top, then click
the bottom in place.
7
2.
Setup
•
Connect the power adaptor supplied with the product to the base unit.
The base power LED will light.
NOTE: The first time you use your headset, it is recommended that the headset is charged
for a minimum of 4 hours before use.
2.1 Connecting to a telephone or terminal with a headset port
•
Using the headset cord supplied with the product, connect the ‘TEL’ port on headset
base with the headset port on your telephone.
•
Use the power adaptor supplied with the product to connect the headset base to a
power socket.
•
You may need to adjust the wiring switch that is located on the bottom of the
headset base to find the correct wiring for your device.
2.2 Connecting to a telephone or terminal without a headset port
•
Using the headset cord supplied with the product, connect the ‘TEL’ port on headset
base with the ‘handset’ port on your telephone.
•
Connect the telephone handset cord to the handset port on the headset base.
•
Use the power adaptor supplied with the product to connect the headset base to a
power socket.
•
You may need to adjust the wiring switch that is located on the bottom of the
headset base to find the correct wiring for your device.
2.3 Connecting to a compatible handset lifter (refer to your supplier)
•
Fit the handset lifter to your telephone as indicated in its user guide.
•
Connect the handset lifter to the ‘EHS’ port located on the back of the headset base.
7
2.
Setup
•
Connect the power adaptor supplied with the product to the base unit.
The base power LED will light.
NOTE: The first time you use your headset, it is recommended that the headset is charged
for a minimum of 4 hours before use.
2.1 Connecting to a telephone or terminal with a headset port
•
Using the headset cord supplied with the product, connect the ‘TEL’ port on headset
base with the headset port on your telephone.
•
Use the power adaptor supplied with the product to connect the headset base to a
power socket.
•
You may need to adjust the wiring switch that is located on the bottom of the
headset base to find the correct wiring for your device.
2.2 Connecting to a telephone or terminal without a headset port
•
Using the headset cord supplied with the product, connect the ‘TEL’ port on headset
base with the ‘handset’ port on your telephone.
•
Connect the telephone handset cord to the handset port on the headset base.
•
Use the power adaptor supplied with the product to connect the headset base to a
power socket.
•
You may need to adjust the wiring switch that is located on the bottom of the
headset base to find the correct wiring for your device.
2.3 Connecting to a compatible handset lifter (refer to your supplier)
•
Fit the handset lifter to your telephone as indicated in its user guide.
•
Connect the handset lifter to the ‘EHS’ port located on the back of the headset base.
Connect the USB cable supplied with the product to the USB port on the back of
the headset base and to an available USB port on your computer.
The computer should automatically recognize the device and install the correct
9
3.
Operation
3.1 Making and receiving calls
3.1.1 Making an outgoing call in telephone mode
•
Ensure that the ‘TEL’ button on top of the headset base is selected.
•
Lift the headset from the base to start the call. If you are already wearing the headset,
press the headset’s ‘ON/OFF’ button. The base ‘Online Indicator’ LED will light. If a
handset lifter or electronic hookswitch device is connected to the headset base, the
line will be seized. Otherwise, you will also need to activate the headset port via your
telephone terminal.
•
Dial the telephone number on the telephone terminal
•
After finishing the call, replace the headset on the base or press the ON/OFF button to
disconnect. The ‘Online Indicator’ LED will turn off.
3.1.2 Receiving an incoming call in telephone mode
•
If there is an incoming call from the telephone line and the headset base is connected
to a handset lifter or electronic hook switch device, the ‘TEL’ LED and headset LED will
flash, also a ring tone will be heard on the headset.
•
Lift the headset from the base to answer the call. If you are already wearing the
headset press the headset’s ‘ON/OFF’ button. The base ‘Online Indicator’ LED will light.
If a handset lifter or electronic hookswitch device is connected to the headset base,
the line will be seized. Otherwise, you will also need to activate the headset port via
your telephone terminal.
•
To end the call, replace the headset on the base or press the headset ON/OFF button.
9
3.
Operation
3.1 Making and receiving calls
3.1.1 Making an outgoing call in telephone mode
•
Ensure that the ‘TEL’ button on top of the headset base is selected.
•
Lift the headset from the base to start the call. If you are already wearing the headset,
press the headset’s ‘ON/OFF’ button. The base ‘Online Indicator’ LED will light. If a
handset lifter or electronic hookswitch device is connected to the headset base, the
line will be seized. Otherwise, you will also need to activate the headset port via your
telephone terminal.
•
Dial the telephone number on the telephone terminal
•
After finishing the call, replace the headset on the base or press the ON/OFF button to
disconnect. The ‘Online Indicator’ LED will turn off.
3.1.2 Receiving an incoming call in telephone mode
•
If there is an incoming call from the telephone line and the headset base is connected
to a handset lifter or electronic hook switch device, the ‘TEL’ LED and headset LED will
flash, also a ring tone will be heard on the headset.
•
Lift the headset from the base to answer the call. If you are already wearing the
headset press the headset’s ‘ON/OFF’ button. The base ‘Online Indicator’ LED will light.
If a handset lifter or electronic hookswitch device is connected to the headset base,
the line will be seized. Otherwise, you will also need to activate the headset port via
your telephone terminal.
•
To end the call, replace the headset on the base or press the headset ON/OFF button.
•
Press the headset’s ON/OFF button. The base’s Online Indicator LED will light.
•
If a handset lifter or electronic hookswitch device is connected to the headset base,
the line will be engaged automatically. Otherwise, you will need lift the headset of your
telephone or activate the headset port on your telephone.
•
To end the call, replace the headset on the base or press the ON/OFF button. If you do
not have an EHS cable or a handset lifter, you will need to manually disconnect the line.
•
Press the headset’s ON/OFF button. The base ‘Online Indicator’ LED will light.
•
If a handset lifter or electronic hookswitch device is connected to the headset base,
the line will be engaged automatically. Otherwise, you will need lift the headset of your
telephone or activate the headset button on your telephone.
•
Dial the number you’re calling.
•
After finishing the call, press the headset ON/OFF button to end the call if you have
a handset lifter or EHS cable. Otherwise, just hang up the phone manually.
3.2
3.3
10
3.1.3 Making an outgoing call in USB/PC mode
•
Ensure that the ‘PC’ button on the top of the headset base is selected.
•
Lift the headset from the base or press the headset’s ON/OFF button if you are already
wearing it and the base ‘Online Indicator’ LED will light.
•
After finishing your VOIP call, press the ON/OFF button to disconnect. The base
‘Online Indicator’ LED will turn off.
3.2 Adjusting the ringing volume
When the headset is ringing to indicate an incoming call, you can adjust the ring volume
with the volume control buttons located on the headset.
3.3 Muting the headset microphone
To mute the headset microphone when on a call, press the mute button on the headset.
While the headset is in mute mode, a short beep will be heard on the headset every 8
seconds. Press the mute button again to release the mute.
3.4 Headset transmitting volume setting
You can adjust the transmit volume of the headset by using the two buttons
located on the bottom of the headset base.
3.5 Adjusting headset receive volume
Use the volume control buttons on the headset to adjust the receive volume of your head
-
set. You will hear a beep sound for each volume step up or down.
3.4
•
If there is an incoming call and the headset base is connected to a handset lifter or
electronic hookswitch device, the TEL light and headset light will flash, and a ring
tone will be heard on the headset.
•
Ensure that the TEL button on top of the headset base is selected.
•
Press the headset’s ON/OFF button. The base’s Online Indicator will light.
the line will be engaged automatically. Otherwise, you will need lift the handset of
your telephone or activate the headset button on your telephone.
•
Ensure that the PC button on the top of the headset base is selected.
•
Lift the headset from the base, or press the headset’s ON/OFF button if you are
already wearing it, and the base’s Online Indicator will light.
•
After finishing your call, press the ON/OFF button to disconnect. The base’s
Online Indicator will turn off.
the line will be engaged automatically. Otherwise, you will need lift the handset of
your telephone or activate the headset button on your telephone.
7
8
Otherwise, you will need to lift the handset of
6
7
manual_270-275_v5.indd 6
3/20/2017 1:18:00 PM
