3.15 Using with Skype for Business
When your LH270 or LH275 is connected to your computer, the buttons on your headset
can be used to answer and end your Skype for Business calls. If you answer/end a call using
the buttons within the software, the headset will also turn on/off automatically.
This feature is automatically
disabled
by default. If you want to turn this feature
off, simply hold the Computer button on the base while holding the “ –”
microphone volume button under the base for 3 seconds. You’ll know you did this
correctly by seeing the Computer button light on your base flash quickly 6 times.
If
you want to turn this feature back on, follow the same steps except press the “ +”
microphone volume button under the base instead of the “ –” button.
3.16 Controlling the Automatic Answer feature for calls
When you take your LH270 or LH275 off of the base, your call will
not
be answered by
default. If you’d like to turn this feature on, simply hold the “+” and “–” buttons on your
headset together for 3 seconds. You’ll know this feature is activated when the LED light
slowly
flashes.
To turn this feature back off, follow the same steps again. This time the LED light will
quickly
flash, letting you know this feature has been turned back off.
14
4.
Troubleshooting
Q.
I have connected my headset base to my telephone terminal but the headset is not
working.
A.
Make sure that the battery has been properly charged.
Q.
The headset is working but I cannot hear telephone calls correctly.
A.
Ensure that you have the correct wiring setting by adjusting the switch on the bottom
of the headset base.
Q.
When the headset’s ON/OFF button is pressed, the handset lifter lifts the handset but
I cannot hear the call on the headset.
A.
Ensure that the headset base is connected to the telephone’s handset port and not
the headset port (if the telephone has one).
Health and safety instructions
Please read the following safety and operational instructions before using your
IPN Headsets product. Please keep these instructions for your reference. When using this
product, these basic safety precautions and warnings should be followed to reduce the risk
of fire, electric shock, injury to persons and damage to property.
General
Operating, charging and storage temperature is 0°C to 40°C (32°F to 104°F).
Warnings
•
CHILDREN. Never allow children to play with the product – small parts may be a
choking hazard.
•
Plug the AC adaptor into the outlet nearest the equipment that is easily accessible.
•
To reduce the risk of electric shock, explosion or fire, use only the supplied charger or
Class 2 AC adaptor to charge the headset. Ensure that the voltage rating
(e.g. 120V, 60 Hz) corresponds to the power supply you intend to use.
•
For safety reasons always tie back long hair that might get caught in the headset.
14
4.
Troubleshooting
Q.
I have connected my headset base to my telephone terminal but the headset is not
working.
A.
Make sure that the battery has been properly charged.
Q.
The headset is working but I cannot hear telephone calls correctly.
A.
Ensure that you have the correct wiring setting by adjusting the switch on the bottom
of the headset base.
Q.
When the headset’s ON/OFF button is pressed, the handset lifter lifts the handset but
I cannot hear the call on the headset.
A.
Ensure that the headset base is connected to the telephone’s handset port and not
the headset port (if the telephone has one).
Health and safety instructions
Please read the following safety and operational instructions before using your
IPN Headsets product. Please keep these instructions for your reference. When using this
product, these basic safety precautions and warnings should be followed to reduce the risk
of fire, electric shock, injury to persons and damage to property.
General
Operating, charging and storage temperature is 0°C to 40°C (32°F to 104°F).
Warnings
•
CHILDREN. Never allow children to play with the product – small parts may be a
choking hazard.
•
Plug the AC adaptor into the outlet nearest the equipment that is easily accessible.
•
To reduce the risk of electric shock, explosion or fire, use only the supplied charger or
Class 2 AC adaptor to charge the headset. Ensure that the voltage rating
(e.g. 120V, 60 Hz) corresponds to the power supply you intend to use.
•
For safety reasons always tie back long hair that might get caught in the headset.
14
4.
Troubleshooting
Q.
I have connected my headset base to my telephone terminal but the headset is not
working.
A.
Make sure that the battery has been properly charged.
Q.
The headset is working but I cannot hear telephone calls correctly.
A.
Ensure that you have the correct wiring setting by adjusting the switch on the bottom
of the headset base.
Q.
When the headset’s ON/OFF button is pressed, the handset lifter lifts the handset but
I cannot hear the call on the headset.
A.
Ensure that the headset base is connected to the telephone’s handset port and not
the headset port (if the telephone has one).
Health and safety instructions
Please read the following safety and operational instructions before using your
IPN Headsets product. Please keep these instructions for your reference. When using this
product, these basic safety precautions and warnings should be followed to reduce the risk
of fire, electric shock, injury to persons and damage to property.
General
Operating, charging and storage temperature is 0°C to 40°C (32°F to 104°F).
Warnings
•
CHILDREN. Never allow children to play with the product – small parts may be a
choking hazard.
•
Plug the AC adaptor into the outlet nearest the equipment that is easily accessible.
•
To reduce the risk of electric shock, explosion or fire, use only the supplied charger or
Class 2 AC adaptor to charge the headset. Ensure that the voltage rating
(e.g. 120V, 60 Hz) corresponds to the power supply you intend to use.
•
For safety reasons always tie back long hair that might get caught in the headset.
14
4.
Troubleshooting
Q.
I have connected my headset base to my telephone terminal but the headset is not
working.
A.
Make sure that the battery has been properly charged.
Q.
The headset is working but I cannot hear telephone calls correctly.
A.
Ensure that you have the correct wiring setting by adjusting the switch on the bottom
of the headset base.
Q.
When the headset’s ON/OFF button is pressed, the handset lifter lifts the handset but
I cannot hear the call on the headset.
A.
Ensure that the headset base is connected to the telephone’s handset port and not
the headset port (if the telephone has one).
Health and safety instructions
Please read the following safety and operational instructions before using your
IPN Headsets product. Please keep these instructions for your reference. When using this
product, these basic safety precautions and warnings should be followed to reduce the risk
of fire, electric shock, injury to persons and damage to property.
General
Operating, charging and storage temperature is 0°C to 40°C (32°F to 104°F).
Warnings
•
CHILDREN. Never allow children to play with the product – small parts may be a
choking hazard.
•
Plug the AC adaptor into the outlet nearest the equipment that is easily accessible.
•
To reduce the risk of electric shock, explosion or fire, use only the supplied charger or
Class 2 AC adaptor to charge the headset. Ensure that the voltage rating
(e.g. 120V, 60 Hz) corresponds to the power supply you intend to use.
•
For safety reasons always tie back long hair that might get caught in the headset.
Leitner LH270 or LH275. Please keep these instructions for your reference. When using this
Troubleshooting
(For live support call 1-800-432-3738, Mon-Fri 6:00–4:30 Pacific Time)
5. Health and safety instructions
Ensure that you have the correct compatibility setting by adjusting the switch on the
bottom of your headset base. The most common compatibility is 1. Cisco telephones
should be set to 4 when using the headset jack.
Q.
I have connected my headset base to my phone but the headset is not working.
12
12
13
3.15 Using with Skype for Business
When your LH270 or LH275 is connected to your computer, the buttons on your headset
can be used to answer and end your Skype for Business calls. If you answer/end a call using
the buttons within the software, the headset will also turn on/off automatically.
This feature is automatically
disabled
by default. If you want to turn this feature
off, simply hold the Computer button on the base while holding the “ –”
microphone volume button under the base for 3 seconds. You’ll know you did this
correctly by seeing the Computer button light on your base flash quickly 6 times.
If
you want to turn this feature back on, follow the same steps except press the “ +”
microphone volume button under the base instead of the “ –” button.
3.16 Controlling the Automatic Answer feature for calls
When you take your LH270 or LH275 off of the base, your call will
not
be answered by
default. If you’d like to turn this feature on, simply hold the “+” and “–” buttons on your
headset together for 3 seconds. You’ll know this feature is activated when the LED light
slowly
flashes.
To turn this feature back off, follow the same steps again. This time the LED light will
quickly
flash, letting you know this feature has been turned back off.
14
4.
Troubleshooting
Q.
I have connected my headset base to my telephone terminal but the headset is not
working.
A.
Make sure that the battery has been properly charged.
Q.
The headset is working but I cannot hear telephone calls correctly.
A.
Ensure that you have the correct wiring setting by adjusting the switch on the bottom
of the headset base.
Q.
When the headset’s ON/OFF button is pressed, the handset lifter lifts the handset but
I cannot hear the call on the headset.
A.
Ensure that the headset base is connected to the telephone’s handset port and not
the headset port (if the telephone has one).
Health and safety instructions
Please read the following safety and operational instructions before using your
IPN Headsets product. Please keep these instructions for your reference. When using this
product, these basic safety precautions and warnings should be followed to reduce the risk
of fire, electric shock, injury to persons and damage to property.
General
Operating, charging and storage temperature is 0°C to 40°C (32°F to 104°F).
Warnings
•
CHILDREN. Never allow children to play with the product – small parts may be a
choking hazard.
•
Plug the AC adaptor into the outlet nearest the equipment that is easily accessible.
•
To reduce the risk of electric shock, explosion or fire, use only the supplied charger or
Class 2 AC adaptor to charge the headset. Ensure that the voltage rating
(e.g. 120V, 60 Hz) corresponds to the power supply you intend to use.
•
For safety reasons always tie back long hair that might get caught in the headset.
14
4.
Troubleshooting
Q.
I have connected my headset base to my telephone terminal but the headset is not
working.
A.
Make sure that the battery has been properly charged.
Q.
The headset is working but I cannot hear telephone calls correctly.
A.
Ensure that you have the correct wiring setting by adjusting the switch on the bottom
of the headset base.
Q.
When the headset’s ON/OFF button is pressed, the handset lifter lifts the handset but
I cannot hear the call on the headset.
A.
Ensure that the headset base is connected to the telephone’s handset port and not
the headset port (if the telephone has one).
Health and safety instructions
Please read the following safety and operational instructions before using your
IPN Headsets product. Please keep these instructions for your reference. When using this
product, these basic safety precautions and warnings should be followed to reduce the risk
of fire, electric shock, injury to persons and damage to property.
General
Operating, charging and storage temperature is 0°C to 40°C (32°F to 104°F).
Warnings
•
CHILDREN. Never allow children to play with the product – small parts may be a
choking hazard.
•
Plug the AC adaptor into the outlet nearest the equipment that is easily accessible.
•
To reduce the risk of electric shock, explosion or fire, use only the supplied charger or
Class 2 AC adaptor to charge the headset. Ensure that the voltage rating
(e.g. 120V, 60 Hz) corresponds to the power supply you intend to use.
•
For safety reasons always tie back long hair that might get caught in the headset.
14
4.
Troubleshooting
Q.
I have connected my headset base to my telephone terminal but the headset is not
working.
A.
Make sure that the battery has been properly charged.
Q.
The headset is working but I cannot hear telephone calls correctly.
A.
Ensure that you have the correct wiring setting by adjusting the switch on the bottom
of the headset base.
Q.
When the headset’s ON/OFF button is pressed, the handset lifter lifts the handset but
I cannot hear the call on the headset.
A.
Ensure that the headset base is connected to the telephone’s handset port and not
the headset port (if the telephone has one).
Health and safety instructions
Please read the following safety and operational instructions before using your
IPN Headsets product. Please keep these instructions for your reference. When using this
product, these basic safety precautions and warnings should be followed to reduce the risk
of fire, electric shock, injury to persons and damage to property.
General
Operating, charging and storage temperature is 0°C to 40°C (32°F to 104°F).
Warnings
•
CHILDREN. Never allow children to play with the product – small parts may be a
choking hazard.
•
Plug the AC adaptor into the outlet nearest the equipment that is easily accessible.
•
To reduce the risk of electric shock, explosion or fire, use only the supplied charger or
Class 2 AC adaptor to charge the headset. Ensure that the voltage rating
(e.g. 120V, 60 Hz) corresponds to the power supply you intend to use.
•
For safety reasons always tie back long hair that might get caught in the headset.
14
4.
Troubleshooting
Q.
I have connected my headset base to my telephone terminal but the headset is not
working.
A.
Make sure that the battery has been properly charged.
Q.
The headset is working but I cannot hear telephone calls correctly.
A.
Ensure that you have the correct wiring setting by adjusting the switch on the bottom
of the headset base.
Q.
When the headset’s ON/OFF button is pressed, the handset lifter lifts the handset but
I cannot hear the call on the headset.
A.
Ensure that the headset base is connected to the telephone’s handset port and not
the headset port (if the telephone has one).
Health and safety instructions
Please read the following safety and operational instructions before using your
IPN Headsets product. Please keep these instructions for your reference. When using this
product, these basic safety precautions and warnings should be followed to reduce the risk
of fire, electric shock, injury to persons and damage to property.
General
Operating, charging and storage temperature is 0°C to 40°C (32°F to 104°F).
Warnings
•
CHILDREN. Never allow children to play with the product – small parts may be a
choking hazard.
•
Plug the AC adaptor into the outlet nearest the equipment that is easily accessible.
•
To reduce the risk of electric shock, explosion or fire, use only the supplied charger or
Class 2 AC adaptor to charge the headset. Ensure that the voltage rating
(e.g. 120V, 60 Hz) corresponds to the power supply you intend to use.
•
For safety reasons always tie back long hair that might get caught in the headset.
Leitner LH270 or LH275. Please keep these instructions for your reference. When using this
Troubleshooting
(For live support call 1-800-432-3738, Mon-Fri 6:00–4:30 Pacific Time)
5. Health and safety instructions
Ensure that you have the correct compatibility setting by adjusting the switch on the
bottom of your headset base. The most common compatibility is 1. Cisco telephones
should be set to 4 when using the headset jack.
Q.
I have connected my headset base to my phone but the headset is not working.
12
12
13
14
4.
Troubleshooting
Q. I have connected my headset base to my telephone terminal but the headset is not
working.
A. Make sure that the battery has been properly charged.
Q. The headset is working but I cannot hear telephone calls correctly.
A. Ensure that you have the correct wiring setting by adjusting the switch on the bottom
of the headset base.
Q. When the headset’s ON/OFF button is pressed, the handset lifter lifts the handset but
I cannot hear the call on the headset.
A. Ensure that the headset base is connected to the telephone’s handset port and not
the headset port (if the telephone has one).
Health and safety instructions
Please read the following safety and operational instructions before using your
IPN Headsets product. Please keep these instructions for your reference. When using this
product, these basic safety precautions and warnings should be followed to reduce the risk
of fire, electric shock, injury to persons and damage to property.
General
Operating, charging and storage temperature is 0°C to 40°C (32°F to 104°F).
Warnings
•
CHILDREN. Never allow children to play with the product – small parts may be a
choking hazard.
•
Plug the AC adaptor into the outlet nearest the equipment that is easily accessible.
•
To reduce the risk of electric shock, explosion or fire, use only the supplied charger or
Class 2 AC adaptor to charge the headset. Ensure that the voltage rating
(e.g. 120V, 60 Hz) corresponds to the power supply you intend to use.
•
For safety reasons always tie back long hair that might get caught in the headset.
14
4.
Troubleshooting
Q. I have connected my headset base to my telephone terminal but the headset is not
working.
A. Make sure that the battery has been properly charged.
Q. The headset is working but I cannot hear telephone calls correctly.
A. Ensure that you have the correct wiring setting by adjusting the switch on the bottom
of the headset base.
Q. When the headset’s ON/OFF button is pressed, the handset lifter lifts the handset but
I cannot hear the call on the headset.
A. Ensure that the headset base is connected to the telephone’s handset port and not
the headset port (if the telephone has one).
Health and safety instructions
Please read the following safety and operational instructions before using your
IPN Headsets product. Please keep these instructions for your reference. When using this
product, these basic safety precautions and warnings should be followed to reduce the risk
of fire, electric shock, injury to persons and damage to property.
General
Operating, charging and storage temperature is 0°C to 40°C (32°F to 104°F).
Warnings
•
CHILDREN. Never allow children to play with the product – small parts may be a
choking hazard.
•
Plug the AC adaptor into the outlet nearest the equipment that is easily accessible.
•
To reduce the risk of electric shock, explosion or fire, use only the supplied charger or
Class 2 AC adaptor to charge the headset. Ensure that the voltage rating
(e.g. 120V, 60 Hz) corresponds to the power supply you intend to use.
•
For safety reasons always tie back long hair that might get caught in the headset.
14
4.
Troubleshooting
Q. I have connected my headset base to my telephone terminal but the headset is not
working.
A. Make sure that the battery has been properly charged.
Q. The headset is working but I cannot hear telephone calls correctly.
A. Ensure that you have the correct wiring setting by adjusting the switch on the bottom
of the headset base.
Q. When the headset’s ON/OFF button is pressed, the handset lifter lifts the handset but
I cannot hear the call on the headset.
A. Ensure that the headset base is connected to the telephone’s handset port and not
the headset port (if the telephone has one).
Health and safety instructions
Please read the following safety and operational instructions before using your
IPN Headsets product. Please keep these instructions for your reference. When using this
product, these basic safety precautions and warnings should be followed to reduce the risk
of fire, electric shock, injury to persons and damage to property.
General
Operating, charging and storage temperature is 0°C to 40°C (32°F to 104°F).
Warnings
•
CHILDREN. Never allow children to play with the product – small parts may be a
choking hazard.
•
Plug the AC adaptor into the outlet nearest the equipment that is easily accessible.
•
To reduce the risk of electric shock, explosion or fire, use only the supplied charger or
Class 2 AC adaptor to charge the headset. Ensure that the voltage rating
(e.g. 120V, 60 Hz) corresponds to the power supply you intend to use.
•
For safety reasons always tie back long hair that might get caught in the headset.
14
4.
Troubleshooting
Q. I have connected my headset base to my telephone terminal but the headset is not
working.
A. Make sure that the battery has been properly charged.
Q. The headset is working but I cannot hear telephone calls correctly.
A. Ensure that you have the correct wiring setting by adjusting the switch on the bottom
of the headset base.
Q. When the headset’s ON/OFF button is pressed, the handset lifter lifts the handset but
I cannot hear the call on the headset.
A. Ensure that the headset base is connected to the telephone’s handset port and not
the headset port (if the telephone has one).
Health and safety instructions
Please read the following safety and operational instructions before using your
IPN Headsets product. Please keep these instructions for your reference. When using this
product, these basic safety precautions and warnings should be followed to reduce the risk
of fire, electric shock, injury to persons and damage to property.
General
Operating, charging and storage temperature is 0°C to 40°C (32°F to 104°F).
Warnings
•
CHILDREN. Never allow children to play with the product – small parts may be a
choking hazard.
•
Plug the AC adaptor into the outlet nearest the equipment that is easily accessible.
•
To reduce the risk of electric shock, explosion or fire, use only the supplied charger or
Class 2 AC adaptor to charge the headset. Ensure that the voltage rating
(e.g. 120V, 60 Hz) corresponds to the power supply you intend to use.
•
For safety reasons always tie back long hair that might get caught in the headset.
Leitner LH270 or LH275. Please keep these instructions for your reference. When using this
Troubleshooting
(For live support call 1-800-432-3738, Mon-Fri 6:00–4:30 Pacific Time)
5. Health and safety instructions
Ensure that you have the correct compatibility setting by adjusting the switch on the
bottom of your headset base. The most common compatibility is 1. Cisco telephones
should be set to 4 when using the headset jack.
Q.
I have connected my headset base to my phone but the headset is not working.
12
12
13
manual_270-275_v5.indd 13
3/20/2017 1:18:03 PM
