Leitch DVR-3901 Neo, Инструкция по установке и эксплуатации

Страница: 58 / 112

42 DVR-3901 Installation and Operation Manual
Chapter 3: Operation
Enabling or Disabling an Alarm Parameter
To enable or disable an alarm parameter, follow these steps:
1. Select
Alarms , then select Config , and then press Enter .
2. Select one of the alarm parameters, and then press Enter .
3. Press Enabled or Disabled .
4. Press Enter to activate the selection.
Restoring Default Settings
To restore the alarms to their default settings, follow these steps:
1. Select
Alarms , select Config , and then press Enter .
2. Scroll down the list of alarms, and then select Reset .
3. Press Enter to activate the selection.
The following table lists the default alarms for the DVR-3901 module.
You can enable or disable these settings, but you cannot change the
level of the alarm.
Table 3-2. Default DVR-3901 Alarms
Card-Edge
Alarm ID
Name of
Alarm
Alarm
Level
Meaning
DARSLckErr DARS Lock
Error Major DARS lock error
DmxErr Demux Error Major Demux error
DskFullErr Disk Full Error Major Disk full
DskMalErr Disk
Malfunction
error Major Disk malfunction
GlVPrsnt Genlock Video
Present Major Loss of reference
SdiPrsnt SDI Present Major Loss of sdi
STDSetErr Video Standard
Setting Error Major Mismatch among
standard setting and
feedbacks: VidStdSet,
GlStdFb and SdiStdFb