Leitch DVR-3901 Neo, Инструкция по установке и эксплуатации

Страница: 46 / 112

30 DVR-3901 Installation and Operation Manual
Chapter 3: Operation
Operator and All List Parameters
This complete list of parameter settings is arranged so that the settings
most likely requiring changes are placed at the top of the list. Items on
the bottom of the list are the least likely to require changing. Parameters
with the designation [RO] are “read-only.” An asterisk (*) indicates the
default user range or value.
The All List is a long flat list of all the available parameters, arranged
from the most-used to least-used. It is intended for a “Supervisor”
security designation. The Operator List is a condensed version of the
All List, and is intended for an “Operator” security designation.
Table 3-1 shows all available parameters. Parameters accessed only
from within the All List are shaded in gray.
See
“Navigating the Operator and All Lists” on page 29 for instructions
on navigating this list using card-edge controls
.
Note
You can reset the default values
for all of the parameters
automatically via the
RstSetting
parameter (see
page 39 ).
Table 3-1. Operator and All List Parameters
Card-Edge
ID
Parameter Name Function
Options or User
Range
AES_Prsnt
[RO] AES In Present Detects the presence of AES Input signals
• Yes
• No
AmonMode Audio Monitor Mode Sets the monitoring audio mode
• Left
• Right
• Mixed*
AudDither Audio Out Dither Mod Selects the Dithering Mode for all outputs
• None*
• On
AudInSrc Audio Input Source Audio Input Source
• AES*
• Embedded
ColorBar ColorBarTestSignal Color Bar Test Signal
• On
• Off*
CompRatio
[RO] Compression Ratio Video Compression Ratio 4.0 to 10.0 (clip)
Ctrl_Port Control Port Sel Selects the control port
• RS-422*
• UDP