Leitch AES6800+, Инструкция по установке и эксплуатации

Страница: 39 / 54

AES6800
+
Installation and Operation Manual 25
Chapter 3: Operation
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
LEDs and Alarms
Module Status LED
The AES6800
+
module has a module status LED that reports the state
of the module. See Figure 1-1 on page 3 or Figure 1-2 on page 4 for the
location of this LED, and Table 3-2 for a definition of LED colors.
Alarms are usually logged and monitored within the available 6800
+
software control applications (for example,
+
Pilot Lite or Pilot). See the
appropriate software control user manual or online help for more
information.
Other LED Descriptions
See Figure 1-1 on page 3 or Figure 1-2 on page 4 for the location of this
LED , and Table 3-3 for a definition of LED colors and meanings.
Table 3-2. Status LED Descriptions
LED Color
Sequence
Meaning
Off There is no power to the module; the module is not
operational
Green There is power to the module; the module operates properly
Red There is an alarm condition
Table 3-3. LED Descriptions
LED Name Color Description (When Lit)
No Lock Red Loss of signal lock
CRC Amber CRC error
Validity Amber Validity error
Confidence Amber Confidence error
Biphase Amber Biphase error
Parity Amber Parity error
All OK Green AES data stream good