Maintenance and Service Tasks
Inspect
Burner Assembly
Burner Ignition and
Operation
Gas Hose with Regulator
1
2
3
4
1
2
3
4
5
6
1
Maintenance Tasks
Remove decorative glass and examine burner. Vacuum and wipe out as
needed. Use caution when cleaning these areas.
Inspect for warping and corrosion. Repair as necessary.
Check the hose connecting the LP gas cylinder to ensure it is not damaged.
Replace as necessary.
Verify air intake area is clean.
Verify all gas connections are tight and leak-free.
Clean off burner top, inspect for plugged ports, corrosion or deterioration.
Replace burner if necessary.
Inspect for flame problems.
Verify air intake is clear of dust and debris.
Inspect orifice for soot, dirt or corrosion.
Verify manifold and inlet pressures. Adjust regulator as required.
The gas hose with regulator supplied with the appliance must be used. The
replacement must be those specified by the appliance manufacturer.
15
FLOATING FIRE
TM
7. Maintaining and Servicing the appliance
Although the frequency of appliance servicing and
maintenance will depend on use and the type of
installation, a qualified service technician should
perform an appliance check-up annually.
Storage of an appliance indoors is permissible only if
the cylinder is disconnected and removed from the ap-
pliance.
WarNINg
RISK OF INJURY OR PROPERTY DAMAGE
Before Servicing:
Turn off utilities to appliance
Ensure appliance is completely cooled
WarNINg
Annual inspection by qualified
technician recommended.
Check:
Obstructions of combustion and
ventilation air.
Condition of burner assembly
Burner ignition and operation
Gas connections and fittings
risk of:
Fire
Delayed ignition or explosion
Exposure to combustion fumes
Odors
