OPERATION
LEISTER Uniplan Wedge
8
Tool positioning
• Place automatic welder onto the overlap of material to be welded.
•
Guide cover (26)
or
laser guide
(optional extra) should be lined up with over-
lap edge of the material to be welded (Fig. E).
•
Drive/pressure roller (8)
should protrude over overlap edge of the material to
be welded by about 2 mm (Fig. E).
• If welding takes place with
guide roller (25)
in position, then set
guide roller
lever (23)
to
"aktiv"
(active) and engage (Fig. F).
• Operate
lifting device (12)
by means of
lifting device lever (18)
so that the
automatic welder is ready to move (Fig. G).
Fig. E
8
26
25
Fig. F
23
24
Fig. G
12
18