• LEISTER Process Technologies and its authorised Service Centres offer welding
and induction courses.
• Check
mains cable (5)
and plug for any electrical
or mechanical damage.
• Clean
hot wedge (6)
with fine brass wire brush.
• Check
guide roller (25)
for stiffness.
• Lubricate slide on
holding arm (15)
(see Fig.).
• The tool must be checked at an authorised Service Centre if
"maintenance;
servicing"
appears on
Display (13)
• Repairs should only be carried out by authorised
LEISTER Service Centres.
These assure,
within 24 hours,
a correct and reliable
repair service
using
original replacements in accordance with the circuit diagrams and spare
parts lists
.
• Guarantee and liability are in accordance with the Guarantee Certificate as
well as the prevailing general Business and Delivery conditions.
• LEISTER Process Technologies rejects any guarantee for tools which are not
in their original condition. Under no circumstances should LEISTER tools be
converted or modified.
Technical data and specifications are subject to change without prior notice.
Your authorised Service Centre is:
GUARANTEE AND LIABILITY
SERVICE AND REPAIR
MAINTENANCE
TRAINING
BA UNIPLAN Wedge /12.03
LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen / Switzerland
Tel. + 41 41 662 74 74 Fax + 41 41 662 74 16
www.leister.com [email protected]
12
Shifting gate
15
®