Leister UNIPLAN 300, Руководство пользователя

Страница: 10 / 31

10
Display symbols for the UNIPLAN 500 status display
Display symbols of the function display
Status display "Area 1" (34) / left
Display symbols for the UNIPLAN 500 working display
Note regarding
undervoltage in the
power supply
Note regarding
overvoltage in the
power supply
Heating is turned on Key block is activated
Status display "Area 2" (35)
General Warning note
See the Chapter Warning and error
messages (UNIPLAN 500) 22 [8]
The Status display is subdivided into a left-hand and a right-hand area.
Profile name
• Displays the name of the selected currently valid welding profile (e.g. Basic).
• If a profile name contains more than six characters, the first six characters are shown first, followed by the
remaining characters.
Voltage
• The current voltage is displayed alternating with the profile name.
During operation, the set welding parameters (drive in m/min
or ft/min, temperature in degrees Celsius or Fahrenheit, air volume in percent and, if appli-
cable, information notes are displayed (see Application Mode: Displaying current values).
Use the
Up/Down arrow keys (26 / 27)
to switch between the welding parameters and
adjust the values individually by turning the "e-Drive" (31) .
Symbol Meaning
Drive speed [m/min / ft./min]
Air temperature [°C/°F]
Air volume [%]
Information box