Leister AIRSTREAM 100, Инструкция по эксплуатации

Страница: 12 / 14

12
(in terms of the EC machinery directive 2006/42/EC; Appendix II A)
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland hereby declares the partly
completed machinery
Designation: Blower
Type:
AIRSTREAM 100
- as far as it is possible from the scope of supply – fulfills the applicable essential requirements of the EC machin-
ery directive (2006/42/EC).
The partly completed machinery furthermore complies with the provisions of the following EU directives:
EC directive(s) 2011/65/EU, 2014/30/EU
Harmonized standards EN ISO 12100, EN 60335-1, EN 55014-1, EN 55014-2, EN 61000-3-2,
EN 61000-3-3, EN IEC 630000
Authorised documentation representative: Thomas Schäfer, Manager Product Conformity
The partly completed machine must not be put into service until the final machinery into which it is to be incor-
porated has been declared in conformity with the provisions of the EC machinery directive (2006/42/EC), where
appropriate.
Kaegiswil, 01/14/2022
Bruno von Wyl, CTO Christoph Baumgartner, GM
10. Declaration of Incorporation
(in terms of The Supply of Machinery (Safety) Regulations 2008, Annex II 1.B)
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland hereby declares the partly
completed machinery
Designation:
Blower
Type: AIRSTREAM 100
– as far as it is possible from the scope of supply – fulfills the applicable essential requirements of The
Supply of Machinery (Safety) Regulations 2008 (2008 No. 1597).
The partly completed machinery furthermore complies with the provisions of the following UK Statutory
Instruments:
UK Statutory Instruments: 2016 No.1091 The Electromagnetic Compatibility Regulations 2016
2012 No. 3032 The Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment Regulations 2012
Designated Standards: EN ISO 12100, EN 60335-1, EN 55014-1, EN 55014-2, EN 61000-3-2,
EN 61000-3-3, EN IEC 63000
Authorised documentation representative: Thomas Schäfer, Manager Product Conformity
The partly completed machine must not be put into service until the final machinery into which it is to be incor-
porated has been declared in conformity with the provisions of the The Supply of Machinery (Safety) Regulations
2008 (2008 No. 1597), where appropriate.
Kaegiswil, 01/14/2022
Bruno von Wyl, CTO Christoph Baumgartner, GM
UK Declaration of Incorporation
EU Declaration of Incorporation