WINDMILL ANCHORING
Leigh Country deems it to be the end user’s responsibility for determining the location and soil
conditions for a windmill display setup. Anchoring the windmill base is very important to
assure a long usable product life. It is the end user’s responsibility in properly anchoring the
product. Product damage may be caused by improper anchoring.
There are several ways to anchor your windmill. Provided below is one such method of
anchoring your windmill to assure a long useful product life.
In order to anchor your Char-log
®
Windmill, it is recommended that at least 4”
-
6” diameter x
12” deep concrete footings be made.
Tools Needed:
- Post Hole Digger
- 80lbs Concrete Mix (approximately 2 x 40lbs bags)
