5.
Scroll to the
mock location
section and turn it on. Depending on
the device manufacturer, it is also possible that you can define which
app should be used as the mock-location app. If this is the case,
select Zeno Connect.
6.
A device restart is recommended to ensure that the settings are ena-
bled.
Connect the GG04 plus antenna
Once the setup is correct, connect the GG04 plus antenna within the Zeno
Connect settings.
Enter the pairing code “0000” when requested.
As soon as connection is established, the position information from the GG04
plus is automatically used by any location aware app running on your device.
For more detailed information about Zeno Connect settings and antenna con-
figuration, refer to the respective documentation.
In case further GNSS metadata are required, some apps allow to establish a
direct connection to the GG04 plus antenna by a Bluetooth connection. It
allows reading NMEA messages directly from the antenna in order to obtain
additional GNSS meta information. Consult the respective app documentation
on how to do this. Zeno Connect is still required to configure and to provide
correction data to the antenna.
The GG04 plus can be connected by Bluetooth settings to an Apple device. Any
location aware app can immediately use the uncorrected, navigated position
coming from the antenna. For a more accurate position, utilise Zeno Connect.
After pairing the antenna with your Apple device using the iOS Bluetooth set-
tings, enter the pairing code “0000” once requested. In case, Zeno Connect is
not yet installed on the Apple device, a pop up is displayed. It guides you auto-
matically to the Zeno Connect installation from the Apple App Store (iOS).
Start Zeno Connect to configure and to provide correction data to the antenna.
The high accuracy position is then automatically used by any location aware
app running on the Apple device.
For more detailed information about Zeno Connect settings and antenna con-
figuration, refer to the respective documentation.
In case further GNSS metadata are required, some apps allow you to establish
a direct connection to the GG04 plus antenna by a SPP Bluetooth connection. It
allows reading NMEA messages coming directly from the antenna in order to
obtain additional GNSS meta information. Consult the respective app documen-
tation on how to do this. Zeno Connect is still required to configure and to pro-
vide correction data to the antenna.
Using Zeno Connect
on Apple devices
Operation
25
a
are
by
t
allows reading NMEA messages directly from the antenna in order to obtain
messages directly from
additional GNSS meta information. Consult the respective app documentation
eta information. Consult the
on how to do this. Zeno Connect is still required to configure and to provide
s. Zeno Connect is still required t
correction data to the anten
the antenna.
utilise Zeno Connect.
are
It
allows reading NMEA messages coming directly from the antenna in order to
obtain additional GNSS meta information. Consult the respective app documen-
tation on how to do this. Zeno Connect is still required to configure and to pro-
vide correction data to the antenna.
Содержание Zeno GG04 plus
Страница 1: ...Leica Zeno GG04 plus User Manual Version 1 0 English ...
Страница 37: ......