Leica V-LUX 1, Инструкция по эксплуатации

Страница: 116 / 145

Connecting to other equipment
116
1
Turn on the camera and the
printer.
2
Connect the camera to a printer
via the USB connection cable
(supplied).
• Connect the USB connection cable with
the [ ] mark facing the [ ] mark on
the [DIGITAL] socket.
• Hold the USB connection cable at
and insert straight in or take straight
out.
3
Press to select [PictBridge
(PTP)] and then press
[MENU/SET].
• If you set [USB MODE] in the [SETUP]
menu to [PictBridge (PTP)] in advance,
it is not necessary to set this every time
you connect to a printer. (P30)
• Do not use any other USB connection
cables except the supplied one.
• To find out more about PictBridge
compliant printers, contact your local
dealer.
w Single picture
1
Press to select
[SINGLE PICTURE] and then
press
[MENU/SET].
2
Press / to select the picture
and then press .
• The message disappears in about
2 seconds.
3
Press to select [PRINT START]
and then press [MENU/SET].
• Press [MENU/SET] to cancel printing.
4
Disconnect the USB connection
cable after printing.
w
Setting date printing, the number of
prints, the paper size and the page
layout
Select and set each item in step
3
.
• Items not supported by the printer are
displayed in gray and cannot be selected.
USB MODE
SELECT SET
MENU
PC
PLEASE SELECT
THE USB MODE
PictBridge(PTP)
SET
MENU
SELECT SET
DPOF PICTURE
SINGLE PICTURE
PictBridge
MENU
SET
MENU
PLEASE SELECT
THE PICTURE TO PRINT
PictBridge
1 / 3
100_0001
EXIT
SELECT
PRINT
MENU
OFF
SINGLE PICTURE
NUM. OF PRINTS
1
PRINT WITH DATE
PAPER SIZE
PAGE LAYOUT
SELECT CANCEL EXIT
MENU
PRINT START
SET
MENU