Leica Ultra Скачать руководство пользователя страница 100

Страница: 100 / 132

Ultra, GPS Capability on Ultra Advanced

100

12.4

Locate Using GPS

12.4.1

External Logging - Mapping Grade GPS

Description

This method of logging location data sends data from the locator to the GPS unit.
This feature is only available on Ultra Advanced units.

Prerequisites

•

The GPS unit must have software that will recognize the data that is sent by the locator.

•

The GPS unit must support Bluetooth SPP connections.

Initial pairing

This is required the first time a GPS device is connected to the locator.
To use a different GPS device, repeat this procedure.

1. Power on the GPS device and ensure its Bluetooth radio is active and discoverable. Refer

to the GPS device manual for details.

2. Power on the locator and go to

Settings

Communications

Radio On/Off

Ensure the radio is “on”.

3. Initiate paring from the GPS device. Refer to the GPS device manual for details.

The locator will be named ”MFLRX_nnnnnnnn” where nnnnnnn is the serial number of
the locator.
If prompted for a passcode, it is

0000

(four zeros).

4. If applicable to the selected GPS device, choose “Serial Port” as the service type.

Connecting to the GPS
device

1. Launch the application software.
2. Connect to the locator in the GPS application software.

For applications that connect to a COM port, make sure it is the incoming COM port.

3. On the locator go to

Settings

Communications

Bluetooth

Connect

GPS

The locator will begin scanning for Bluetooth

devices.

Make sure the GPS device is still discoverable.

4. Select the GPS device from the list. The locator will begin the connection process.

Содержание Ultra





































































































































Результаты поиска

Содержание Ultra

Отзывы:

Похожие инструкции для Ultra

Бренды по названию

Популярные бренды

Leica Ultra, Руководство пользователя

Результаты поиска

Содержание Ultra

Отзывы:

Похожие инструкции для Ultra

Бренды по названию

Популярные бренды