
CO
IN
ID
PM
FS
SC
OC
IO
AR
RC
EG
CA
CT
BC
DF
SD
TS
IX
© Leica
TPS-System 1000-2.3.1en
195
Leaves the old values unchanged.
Stores the new values.
If the differences between the horizontal and vertical
angles exceed ±27' ( ±0.5 gon ), the display gives an
error message. The user is made aware of this by an
acoustic signal and the
key is redefined as "OK".
The measurement procedure can be repeated.
If the value of the ATR1 horizontal and vertical
collimation errors exceeds 2' 42" (0.05 gon), repeat the
measurement procedure.
Similarly, if the value of the V-index error (i) exceeds
54' (1 gon) or if the value of the line-of-sight error (c)
exceeds 5' 24" (0.1 gon) , the measurements are to be
repeated.
If these values are exceeded repeatedly, please contact
service.
Tripod
The connections between timber and metal must always
be firm and tight.
- Moderately tighten the Allen screws (2).
- Tighten articulated joints (1) just enough to keep the
tripod legs open when you lift the tripod off the
ground.
TC600Z34
2
1
Mechanically