Leica Rugby 400 DG, Руководство пользователя, Страница: 19 / 36

19
Rugby 400 DG 1.1.0en
Accessories
The Standby button will cause
the Rugby to go into standby
mode for up to 16 hours. After
this time the Rugby will shut off and
can only be turned on again at the
laser.
When in standby mode the display will
show only a sleeping Rugby.
Pressing any button (except power)
while the unit is in standby mode will
cause the laser to return to normal
operation.
Automatic Shut Off - To conserve
battery power, the remote will
automatically shut off after two minutes
of non-use.
Low Battery – The remote will display
a low battery screen when the
batteries have reached a voltage
where the remote can no longer
communicate with the laser.
To replace the batteries, remove the
bottom cover of the housing. Install as
indicated on the side of the housing.
Before you can use the remote it is
necessary to enable the remote
capability on the laser.
To do this follow the instructions for
entering and changing the setup in the
second setup screen (page 14).
When enabled, the remote symbol will
appear on the bottom of the main
display.
Programing the remote – To program
the remote for your laser press and
hold the
STAR button, then press the
POWER button.
The remote will search the immediate
area for Rugby units with remote
capability, and will identify these in the
display.
To select your laser highlight the serial
number and press the
STAR button.
The remote will connect to the selected
laser.
To exit this screen without changing
settings, highlight
EXIT - NO CHANGE
and press the X/Y button.
Change the remote
symbol in the setup
screen so that it no
longer has a line through
it.