Leica Rugby 400 DG, Руководство пользователя, Страница: 12 / 36

12
Setup
Rugby 400 DG 1.1.0en
Head Speeds
The Rugby can be set to any of four
different head speeds – 5, 10 , 15, or
20 rps. (300, 600, 900, 1200 rpm)
Select the head speed that provides
the best performance for your
application.
H.I. (Height of Instrument)
The H.I. function is used to prevent
elevation changes caused by
movement of the tripod.
When the H.I. Alert function is
activated, the self-leveling accuracy
remains the same, but the self-leveling
range of the Rugby is reduced.
Movement of the Rugby beyond its
self-leveling range will cause an “alert
condition”. The Rugby will stop rotating
and the following screen will appear on
the display:
Stop the “alert condition” by pressing
the Star or Power button and reset the
function.
Check carefully the setup and
elevation of the unit to determine what
has caused the alert condition. Adjust
as required to the correct elevation.
The H.I. function can be turned on or
off in the
first setup screen.
When the H.I. function is turned on, the
letters “HI” will appear in the bottom,
right part of the display.
The H.I. function becomes active 30
seconds after the unit has completely
leveled and the head starts rotating.
Automatic and Manual Mode:
The Rugby will always turn on in
automatic mode and will continuously
self-level to maintain grade accuracy.
)
In manual mode the self-
leveling function is turned off.
The display screen will show the
following:
The plane of laser light can be
changed using the X/Y and arrow
buttons, but the amount of change is
not shown in the display.
Manual Mode with Grade
In Manual Mode with Grade, the
display will alternately show the grade
entered for the X and Y axes.
The H.I. function can be
made to turn on automa-
tically at power-up. This
can be enabled in the
second setup screen.