Leica OH4, Руководство по обслуживанию, Страница: 49 / 264

Service Manual Leica M525 OH4 Control Unit Service Programs and Communications
Doc Code 10665744 04/2007 3102-KOJ
3-11
Accessory List
Select “Accessory List” folder to activate all
device you use with your Leica M525 OH4.
Press the “Toggle” button (1) to activate all
devices you use.
Default settings for all devices is “inactive”.
If you activate the FL400 or FL800 device you will
have the additional information
Whitelight/Bluelight/or NIR Light in the status line.
If you activate the DI C500 you will have the
additional button DI C500 in quick access button
bar.
FL (Fluorescence)
Select “FL” folder to make the following
fluorescence settings:
Use arrow keys to adjust “FL800 NIR Zoom
Reset” (1) value. This value is the increment of
reset motor position. Default value is 11776.
Use arrow keys to adjust “Time Limiter for NIR
Mode” (2) value. This value is the time after which
the NIR Mode is switched of automatically.
Default value is 180 seconds.
DI C500
Select “ DI C500” folder to make the following DI
C500 settings:
Standard VESA mode: Use arrow keys to select
the frequency of incoming XGA signal. Default is
60 Hz.
Fine Phase Timing: Default is16.
CRT Emulation Gamma: Default is 2.2.
Color Temperature: Select color temperature of
the microscope illumination. Default is 6500K
(Xenon).
1
2
1