Leica OH4, Руководство по обслуживанию, Страница: 40 / 264

Service Manual Leica M525 OH4 Control Unit Service Programs and Communications
Doc Code 10665744 04/2007 3102-KOJ
3-2
3.2 How to enter the Service Menu
3.2.1 General Menu Information
After start up process the Main page is displayed on Leica M525 OH4 Control Unit.
There is a quick access button (1) bar to go to the Main-, Speed-, Menu- and Help- pages.
The button “Main” (2) opens Main page which allows you to set Magnification, Working Distance and
brightness.
You can also switch of Brightcare
TM
, adjust D-Balance, activate WD reset function or change the lamp.
The button “Speed” (3) opens Speed page which allows you to adjust speed of Zoom, Focus and X/Y
motor. You can also chose between Focus Lock and XYZ Free for Selected Brakes
The button “Menu” (4) opens Menu page. Here you find 4 buttons to go to “User settings” area,
“Maintenance” Menu, “How To” pages and the “Service Menu”.
The button “Help” (5) in the quick access button bar opens a page with 16 “How to…”-pages. The
“How To…” pages are quick reference guides to the most important topics.
The button “Check” (6) shows up incase any errors occur. Press the “Check “ button to open a list with
all error messages.
The Status line (7) gives you at any time the information of active user and/or current position in the
menu.
Dynamic Button bar (8) offers you different functions depending from where you are in the menu.
For detailed information please refer to the user manual Leica M525 OH4 (10 714 367).
1
6 5
8
4 3
2
7