Leica MST31, Руководство пользователя

Страница: 25 / 39

9
Comment:
The momentary absolute position is sent.
If a SET REFERENCE (70 013) is not performed the absolute position refers to the position at
power-on.
Range:
±
2.147.483.647
Example (for RS 232):
Momentary absolute position = 7.25 mm
host sends: 70 032 <CR>
host receives: 70 032 7250<CR>
5.10 SET VELOCITY
Sets the velocity
Command code:
70 033
Parameter: up to 4 bytes (Velocity in
‰
)
Return: none
Comment:
The positioning velocity is set in parts per thousand (
‰
) of the maximum velocity.
In the system, however, the velocity is only divided into 62 increments. It is therefore
possible that the set velocity does not correspond exactly to the read velocity (see REPORT
VELOCITY)
5.11 REPORT VELOCITY
Queries the current positioning velocity.
Command code:
70 034
Parameter: none
Return: up to 4 bytes (Velocity in
‰
)
Comment:
The positioning velocity is returned in parts per thousand (
‰
) of the maximum velocity.
The velocity is actually subdivided into a total of 62 increments. One velocity increment
corresponds to approx. 16.2
‰
.