Leica M125 C, Руководство пользователя

Страница: 7 / 107

Leica M Series User Manual 7
Safety Instructions (Continued)
•
Direct contact with eyepieces is a
potential transmission method for
bacterial and viral infections of the eye.
The risk can be kept to a minimum by using
personal eyepieces for each individual or
detachable eyecups.
Technical safety
To connect the Leica M Series microscopes to
power, use a power cable that meets the power
cable specifications in your country. The power
socket used has to be equipped with a 16 A or
10 A fuse. Only connect the instrument to a
grounded power socket that has been installed
according to regulations. The power supply
voltage has to correspond to the voltage speci-
fied on the identification label. Make sure that
the ground connection is neither defective
nor interrupted, since otherwise a malfunction
poses a risk of fatal injury. Never unplug the
power plug with moist or wet hands. There is
danger of an electric shock.
Instrument safety and EMC
Our device has been designed, produced and
tested in compliance with
O
IEC EN 61010-1: Electrical equipment for
measurement, control and laboratory use
– Safety – Part one: general requirements
O
EN 60950-1: Information technology
equipment – Safety – Part one: general
requirements
O
Radio interference suppression in compli-
ance with EN 55011 class B
O
Noise immunity in compliance with
DIN EN 61326-1.
The device meets the requirements of EU
directives
O
2014/35/EU Low voltage directive
O
2014/30/EU EMC directive
O
2011/65/EU RoHS directive
and carries the CE mark.
The device must be disposed of in
accordance with 2012/19/EU WEEE
directive.
Intended for indoor use only in all EU member
states, EFTA states and Switzerland.