Leica M Monochrom, Инструкция по эксплуатации

Страница: 164 / 252

EN
161
Ba
sic
p
ic
tur
e s
etti
ng
s
ISO SENSITIVITY
The ISO setting covers a range of ISO 320 – 12500 in
1
/
3
ISO
increments, and thus enables you to adapt the shutter speed/
aperture values to the relevant situation as required. In addition
there is the setting
Push 25000
that corresponds to a sensitivity of
ISO 25000.
As well as the fixed settings, the camera also features the
Auto 1
function, in which the camera automatically adjusts the sensitivity
to the ambient brightness and the shutter speed/aperture settings.
In conjunction with aperture priority mode (see p. 176) this
extends the range for automatic exposure control. A manual setting
provides more flexibility for using the desired shutter speed/
aperture combination.
However, when using the function it is also possible to specify
priorities, for example for compositional reasons.
Note:
Particularly at high ISO values and when editing pictures, noise as
well as vertical and horizontal stripes may become visible, especial-
ly in large, uniformly bright areas of the subject.
1
The function is not available when using flash units.
Setting the function
With the
ISO
button
1. Press the
ISO
button.
• The corresponding sub-menu appears in the monitor.
2. While holding down the
ISO
button, use the thumbwheel to
select the desired sensitivity or the automatic setting.
Note:
When you release the
ISO
button, the sub-menu remains visible for
around 2s. However, the set value is applied immediately.
Using the menu
1. In the picture parameters menu (see p. 150/240), select
ISO
, and
2. use the thumbwheel or press up/down on the direction pad to
set the desired sensitivity or select the automatic setting.
3. confirm your setting with the
INFO
or
SET
button.
To set the sensitivity automatically
3. In the 2nd step, select
Auto
.
• The previously grayed-out (unavailable) sub-menu options
are now enabled.