Leica M Edition 60, Инструкция по эксплуатации

Страница: 117 / 190

EN
115
Ap
pe
ndi
x
1. Brightline frames for 50mm and 75mm
1
(example)
2. Metering field for distance setting
3. LEDs
1
(Light Emitting Diodes) for:
a. Four-digit digital display with dots above and below
Digital display:
– Display of the automatically determined shutter speed for
aperture priority mode A , or for counting down shutter speeds
slower than 1s
– Warning that the metering or setting ranges are overshot or
undershot using aperture priority
A
– Date/time display (during setting only)
– Indicates that the back-up memory is (temporarily) full
– Indicates that no memory card is loaded (
Sd
)
– Indicates that the memory card is full (
Full
)
– Indicates insufficient battery capacity (
bc
)
– Indicates that a firmware update is in progress or is complete
(
UP
)
– Firmware update not possible (
Err
)
b.
•
Dot above:
– Indicates (when lit) that saved metering values are being used
– Indicates the date display (during setting only)
c.
•
Dot below:
– Indicates (flashing) that exposure compensation is being used
– Indicates the time display (during setting only)
d. Two triangular and one circular LED:
– For manual exposure setting: Jointly used as light balance for
exposure compensation The triangular LEDs give the direction
of rotation of the aperture setting ring and shutter speed
setting dial to adjust the exposure.
– Warning of values below the metering range
e. Flash symbol:
– Flash ready to use
– Details of flash exposure before and after the picture
1
With automatic brightness control adjusted to the ambient brightness. This automatic control
is not available for Leica M lenses with viewfinder attachments, since they cover the brightness
sensor that supplies the information required. In such cases the frame and displays always
maintain a constant brightness.