Leica M Edition 60, Инструкция по эксплуатации

Страница: 103 / 190

EN
101
M
isce
lla
ne
ous
INSTALLING FIRMWARE UPDATES
Leica is constantly working on developing and optimizing its products. As
many functions of the camera are entirely controlled by software, some of
these improvements and extended functions can be installed at a later date.
Leica provides firmware updates at irregular intervals for this purpose.
Information about any resulting changes or additions to the details in this
manual can be found on our website.
You can download new firmware from our home page and transfer it to your
camera:
1. Turn off the camera and insert the card into a card reader – either
integrated or connected to your computer. Format a memory card.
2. Download the Firmware file from our website using the “UPDATES” link.
3. Save the file *.FW at the top level of the card's folder structure.
Remove the card from your card reader.
4. Make sure the camera is turned off, insert the card in the camera, and
close the bottom cover.
5. Hold down the function button and turn on the camera.
The update process begins. This can take up to 15 minutes.
Displays
Viewfinder LED
(continuously lit)
Rear panel LED
During the process
UP
Lit
When update is
complete
UP
Goes out
Battery capacity too
low for update
process
bc
Flashing slowly
Update not possible*
Err
Flashing quickly
* e.g. because the camera cannot find an update file on the card