Leica IMS500 / IMS500 HD
Manual
7
Information for the person responsible for the instrument
Information for the person responsible for the instru-
ment
O
Ensure that the Leica IMS500 Systems system is used
only by qualified personnel.
O
Ensure that this user manual is always available.
O
Carry out regular inspections to make certain that the
authorized users are adhering to safety requirements.
O
When instructing new users, do so thoroughly and
explain the meanings of the warning signs and
messages.
O
Assign individual responsibilities for starting, oper-
ating and servicing the instrument and monitor the
observance of these responsibilities.
O
Do not use the Leica IMS500 Systems system unless it
is in perfect condition.
O
Inform your Leica representative or Leica Microsystems
(Schweiz) AG, Industry Division, 9435 Heerbrugg,
Switzerland, immediately of any product defect that
could potentially cause injury or harm.
O
If you use accessories made by third-party manu-
facturers with the Leica IMS500 Systems system, be
sure that each such manufacturer confirms that the
combination is safe to use and observe the product's
user manual.
O
Modifications and maintenance of the Leica IMS500
Systems system may only be performed by profes-
sionals expressly authorized by Leica.
O
Only original Leica replacement parts may be used in
servicing the product.
O
After service work or technical modifications, the unit
must be reconfigured with observance to our technical
requirements.
O
If the unit is modified or serviced by unauthorized
persons, is improperly maintained (as long as main-
tenance was not carried out by us), or is handled
improperly, Leica will not accept any liability.
O
The electric installation in the building must conform
to the national standard, e.g. current-operated
ground leakage protection (fault-current protection)
is suggested.
