Leica iCON iCR70 Скачать руководство пользователя страница 69

Страница: 69 / 70

Software Licence Agreement

This product contains software that is preinstalled on the product, or that is

supplied to you on a data carrier medium, or that can be downloaded by you

online according to prior authorisation from Leica Geosystems. Such software is

protected by copyright and other laws and its use is defined and regulated by

the Leica Geosystems Software Licence Agreement, which covers aspects such

as, but not limited to, Scope of the Licence, Warranty, Intellectual Property

Rights, Limitation of Liability, Exclusion of other Assurances, Governing Law

and Place of Jurisdiction. Please make sure, that at any time you fully comply

with the terms and conditions of the Leica Geosystems Software Licence

Agreement.
Such agreement is provided together with all products and can also be referred

to and downloaded at the Leica Geosystems home page at

http://leica-geosystems.com/about-us/compliance-standards/legal-documents

or collected from your Leica Geosystems distributor.
You must not install or use the software unless you have read and accepted

the terms and conditions of the Leica Geosystems Software Licence Agree-

ment. Installation or use of the software or any part thereof, is deemed to be

an acceptance of all the terms and conditions of such Licence Agreement. If

you do not agree to all or some of the terms of such Licence Agreement, you

must not download, install or use the software and you must return the

unused software together with its accompanying documentation and the pur-

chase receipt to the distributor from whom you purchased the product within

ten (10) days of purchase to obtain a full refund of the purchase price.

The software on the product may contain copyright-protected software that is

licenced under various open source licences.
Copies of the corresponding licences

•

are provided together with the product (for example in the About panel of

the software)

•

can be downloaded on

http://opensource.leica-geosystems.com

If foreseen in the corresponding open source licence, you may obtain the cor-

responding source code and other related data on

http://opensource.leica-geosystems.com.
Contact

[email protected] in case you need additional information.

Software Licence

Agreement

Open Source

information

Software Licence Agreement

Содержание iCON iCR70







































































Результаты поиска

Содержание iCON iCR70

Отзывы:

Похожие инструкции для iCON iCR70

Бренды по названию

Популярные бренды

Leica iCON iCR70, Руководство пользователя

Результаты поиска

Содержание iCON iCR70

Отзывы:

Похожие инструкции для iCON iCR70

Бренды по названию

Популярные бренды